This command is needed in the qmi proto handler to check if the plmn is already set to 'auto'.
The reason for this is, that setting the plmn to 'auto' will implicitly lead to a (delayed) network re-registration, which could further lead to some timing related issues in the qmi proto handler. Signed-off-by: Martin Schiller <[email protected]> --- commands-nas.c | 31 +++++++++++++++++++++++++++++++ commands-nas.h | 2 ++ 2 files changed, 33 insertions(+) diff --git a/commands-nas.c b/commands-nas.c index 5874bfb..1f7445d 100644 --- a/commands-nas.c +++ b/commands-nas.c @@ -293,6 +293,37 @@ cmd_nas_get_serving_system_prepare(struct qmi_dev *qmi, struct qmi_request *req, } static void +cmd_nas_get_plmn_cb(struct qmi_dev *qmi, struct qmi_request *req, struct qmi_msg *msg) +{ + struct qmi_nas_get_system_selection_preference_response res; + static const char *modes[] = { + [QMI_NAS_NETWORK_SELECTION_PREFERENCE_AUTOMATIC] = "automatic", + [QMI_NAS_NETWORK_SELECTION_PREFERENCE_MANUAL] = "manual", + }; + void *c; + + qmi_parse_nas_get_system_selection_preference_response(msg, &res); + + c = blobmsg_open_table(&status, NULL); + if (res.set.network_selection_preference) { + blobmsg_add_string(&status, "mode", modes[res.data.network_selection_preference]); + } + if (res.set.manual_network_selection) { + blobmsg_add_u32(&status, "mcc", res.data.manual_network_selection.mcc); + blobmsg_add_u32(&status, "mnc", res.data.manual_network_selection.mnc); + } + + blobmsg_close_table(&status, c); +} + +static enum qmi_cmd_result +cmd_nas_get_plmn_prepare(struct qmi_dev *qmi, struct qmi_request *req, struct qmi_msg *msg, char *arg) +{ + qmi_set_nas_get_system_selection_preference_request(msg); + return QMI_CMD_REQUEST; +} + +static void cmd_nas_network_scan_cb(struct qmi_dev *qmi, struct qmi_request *req, struct qmi_msg *msg) { static struct qmi_nas_network_scan_response res; diff --git a/commands-nas.h b/commands-nas.h index 9ebfa00..4b175f9 100644 --- a/commands-nas.h +++ b/commands-nas.h @@ -24,6 +24,7 @@ __uqmi_command(nas_set_network_modes, set-network-modes, required, CMD_TYPE_OPTION), \ __uqmi_command(nas_initiate_network_register, network-register, no, QMI_SERVICE_NAS), \ __uqmi_command(nas_set_plmn, set-plmn, no, QMI_SERVICE_NAS), \ + __uqmi_command(nas_get_plmn, get-plmn, no, QMI_SERVICE_NAS), \ __uqmi_command(nas_set_mcc, mcc, required, CMD_TYPE_OPTION), \ __uqmi_command(nas_set_mnc, mnc, required, CMD_TYPE_OPTION), \ __uqmi_command(nas_network_scan, network-scan, no, QMI_SERVICE_NAS), \ @@ -44,6 +45,7 @@ " --set-plmn: Register at specified network\n" \ " --mcc <mcc>: Mobile Country Code (0 - auto)\n" \ " --mnc <mnc>: Mobile Network Code\n" \ + " --get-plmn: Get preferred network selection info\n" \ " --get-signal-info: Get signal strength info\n" \ " --get-serving-system: Get serving system info\n" \ -- 2.11.0 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
