The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
I think the ideology behind proto handler there is to "do whatever
told" despite of what the state is currently,
maybe there is a reason for such behaviour (searches some stuff from
network etc).
--
Sami Olmari
On Mon, Aug 26, 2019 at 1:48 PM Martin Schiller <m...@dev.tdt.de> wrote:
>
> Can somebody please take a look at this patch.
>
> It's really necessary to fix the problem in the qmi proto handler.
>
> Thanks,
> Martin
>
> On 2019-07-04 13:35, Martin Schiller wrote:
> > This command is needed in the qmi proto handler to check if the plmn
> > is already set to 'auto'.
> >
> > The reason for this is, that setting the plmn to 'auto' will implicitly
> > lead to a (delayed) network re-registration, which could further lead
> > to some timing related issues in the qmi proto handler.
> >
> > Signed-off-by: Martin Schiller <m...@dev.tdt.de>
> > ---
> > commands-nas.c | 31 +++++++++++++++++++++++++++++++
> > commands-nas.h | 2 ++
> > 2 files changed, 33 insertions(+)
> >
> > diff --git a/commands-nas.c b/commands-nas.c
> > index 5874bfb..1f7445d 100644
> > --- a/commands-nas.c
> > +++ b/commands-nas.c
> > @@ -293,6 +293,37 @@ cmd_nas_get_serving_system_prepare(struct qmi_dev
> > *qmi, struct qmi_request *req,
> > }
> >
> > static void
> > +cmd_nas_get_plmn_cb(struct qmi_dev *qmi, struct qmi_request *req,
> > struct qmi_msg *msg)
> > +{
> > + struct qmi_nas_get_system_selection_preference_response res;
> > + static const char *modes[] = {
> > + [QMI_NAS_NETWORK_SELECTION_PREFERENCE_AUTOMATIC] =
> > "automatic",
> > + [QMI_NAS_NETWORK_SELECTION_PREFERENCE_MANUAL] = "manual",
> > + };
> > + void *c;
> > +
> > + qmi_parse_nas_get_system_selection_preference_response(msg, &res);
> > +
> > + c = blobmsg_open_table(&status, NULL);
> > + if (res.set.network_selection_preference) {
> > + blobmsg_add_string(&status, "mode",
> > modes[res.data.network_selection_preference]);
> > + }
> > + if (res.set.manual_network_selection) {
> > + blobmsg_add_u32(&status, "mcc",
> > res.data.manual_network_selection.mcc);
> > + blobmsg_add_u32(&status, "mnc",
> > res.data.manual_network_selection.mnc);
> > + }
> > +
> > + blobmsg_close_table(&status, c);
> > +}
> > +
> > +static enum qmi_cmd_result
> > +cmd_nas_get_plmn_prepare(struct qmi_dev *qmi, struct qmi_request
> > *req, struct qmi_msg *msg, char *arg)
> > +{
> > + qmi_set_nas_get_system_selection_preference_request(msg);
> > + return QMI_CMD_REQUEST;
> > +}
> > +
> > +static void
> > cmd_nas_network_scan_cb(struct qmi_dev *qmi, struct qmi_request *req,
> > struct qmi_msg *msg)
> > {
> > static struct qmi_nas_network_scan_response res;
> > diff --git a/commands-nas.h b/commands-nas.h
> > index 9ebfa00..4b175f9 100644
> > --- a/commands-nas.h
> > +++ b/commands-nas.h
> > @@ -24,6 +24,7 @@
> > __uqmi_command(nas_set_network_modes, set-network-modes, required,
> > CMD_TYPE_OPTION), \
> > __uqmi_command(nas_initiate_network_register, network-register, no,
> > QMI_SERVICE_NAS), \
> > __uqmi_command(nas_set_plmn, set-plmn, no, QMI_SERVICE_NAS), \
> > + __uqmi_command(nas_get_plmn, get-plmn, no, QMI_SERVICE_NAS), \
> > __uqmi_command(nas_set_mcc, mcc, required, CMD_TYPE_OPTION), \
> > __uqmi_command(nas_set_mnc, mnc, required, CMD_TYPE_OPTION), \
> > __uqmi_command(nas_network_scan, network-scan, no, QMI_SERVICE_NAS),
> > \
> > @@ -44,6 +45,7 @@
> > " --set-plmn: Register at specified
> > network\n" \
> > " --mcc <mcc>: Mobile Country Code (0 -
> > auto)\n" \
> > " --mnc <mnc>: Mobile Network Code\n" \
> > + " --get-plmn: Get preferred network
> > selection info\n" \
> > " --get-signal-info: Get signal strength
> > info\n" \
> > " --get-serving-system: Get serving system
> > info\n" \
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
--- End Message ---
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
