Hi,
That's wrong. You have 0x7d0000, not 0xfd0000 ...
There seems to be some discrepancy, possibly v1 vs v2. The
specifications on the website and the partitioning seem to imply a 8MB
image size - however, U-boot bootloader and the sum of MTD block sizes
gives us 16MB. Unsure, I tried both 8000 and 16192. Both seem to work
well, save for some I/O errors when writing files to homedir with both.
Not sure what that implies, but assuming 16MB as size all that given.
Will this work without a defined gpio?
Could you elaborate?
The rest seem straightforward to me, I will be happy to fix them in the
next version.
Closing thought, the aforementioned I/O errors. Parts of the filesystem
seem to corrupt on occasion on my test device. I will look more into if
it's a hardware issue, but for now are there any possible
software/config causes you can think of?
Thanks much,
P. B.
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
