Hi, > -----Original Message----- > From: openwrt-devel [mailto:[email protected]] On > Behalf Of Kryma > Sent: Montag, 11. November 2019 23:02 > To: [email protected] > Subject: Re: [OpenWrt-Devel] [PATCH] ath79: add support for COMFAST CF- > E130N v2 > > Hi, > > > That's wrong. You have 0x7d0000, not 0xfd0000 ... > > There seems to be some discrepancy, possibly v1 vs v2. The > specifications on the website and the partitioning seem to imply a 8MB > image size - however, U-boot bootloader and the sum of MTD block sizes > gives us 16MB. Unsure, I tried both 8000 and 16192. Both seem to work > well, save for some I/O errors when writing files to homedir with both. > Not sure what that implies, but assuming 16MB as size all that given.
based on how we use it currently, IMAGE_SIZE should match the size of the
firmware partition.
>
> > Will this work without a defined gpio?
>
> Could you elaborate?
+ rssimediumhigh {
+ label = "cf-e130n-v2:green:rssimediumhigh";
+ // No individual GPIOs matched this LED!
+ };
Will this still work when using rssimediumhigh in 01_leds?
Best
Adrian
openpgp-digital-signature.asc
Description: PGP signature
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
