Hi Enrico, > -----Original Message----- > From: Enrico Mioso [mailto:[email protected]] > Sent: Dienstag, 17. September 2019 19:59 > To: [email protected] > Cc: Filip Moc <[email protected]>; [email protected] > Subject: RE: [OpenWrt-Devel] [PATCH] ath79: add support for TP-Link TL- > MR6400 > > Thanks! I'll take a look now. > Still, something should be interestingly wrong here: > > root@OpenWrt:/# swconfig dev switch0 show|grep -i link > link: port:0 link:up speed:1000baseT full-duplex txflow rxflow > link: port:1 link:up speed:100baseT full-duplex auto > link: port:2 link:down > link: port:3 link:down > link: port:4 link:down > root@OpenWrt:/#
I've just unearthed this topic in my mailbox and tried a port myself based on your V2 patch. You will find the updated version in a branch of my staging repo here: https://git.openwrt.org/?p=openwrt/staging/adrian.git;a=shortlog;h=refs/heads/mr6400 (Most recent patch there.) Despite several minor issues (sorting, rebase, etc.) I've also addressed the following major issues: 1. Use gpio-export again instead of gpio-hog, so LTE can be switched on/off 2. Added adb-enablemodem 3. Removed the phy-swap in DTS. This is not present in the mach-file for mr6400, only in the one for the fritzbox 4020 you took as blueprint. 4. Adjusted ports 2 vs. 3 in 02_network based on your assessment. This will most probably be wrong again now, as this might be influenced by the phy-swap. 5. LAN/WAN LEDs still won't work properly, as at least one will need to be changed to ucidef_set_led_switch, and I cannot check that without the device. Best Adrian
openpgp-digital-signature.asc
Description: PGP signature
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
