Hi, > -----Original Message----- > From: Enrico Mioso [mailto:[email protected]] > Sent: Dienstag, 17. September 2019 18:57 > To: Filip Moc <[email protected]> > Cc: Adrian Schmutzler <[email protected]>; > [email protected]; Piotr Dymacz <[email protected]> > Subject: Re: [OpenWrt-Devel] [PATCH] ath79: add support for TP-Link TL-MR6400 > > BTW I can see the code for setting up network interfaces in mach-tl-mr6400.c > is identical to the one in mach-fritz4020.c for which we > have ath79 support. > Hence, I copied the setup from there: > > ð0 { > status = "okay"; > phy-mode = "mii"; > phy-handle = <&swphy0>; > > mtd-mac-address = <&uboot 0x1fc00>; > mtd-mac-address-increment = <1>; > > gmac-config { > device = <&gmac>; > switch-phy-addr-swap = <1>; > switch-phy-swap = <1>;
That's the phy-swap I was referring to in the other mail.
Using that will change the ports in 02_network, so you will have to re-evaluate
the connection status with swconfig.
I do not remember what switch-phy-addr-swap does.
Best
Adrian
> };
> };
>
> ð1 {
> status = "okay";
> mtd-mac-address = <&uboot 0x1fc00>;
> mtd-mac-address-increment = <(-1)>;
> };
>
> yeah, here I am using spaces but the original code has tabs. :)
>
> Am I overlooking something?
>
> Second question - I got the LTe module working with gpio-hog. How can now I
> turn off the LTE module, writing a value to the GPIO?
> Thanks!!
> Enrico
openpgp-digital-signature.asc
Description: PGP signature
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
