On 28.05.20 04:42, [email protected] wrote:
Hi Koen,
I'm really sorry that I missed your previous email.
Tried sysupgrade --> results in platform_check failure.
In the original device naming convention, E750 was named glinet,gl-e750
However, in today's openwrt, the name of the device is glinet_gl-e750,
so platform_check failure is prompted.
You'd better use uboot to upgrade your firmware, follow the link below
for the uboot upgrade steps
https://docs.gl-inet.com/en/3/troubleshooting/debrick/
this device also only has 1 ethernet port exposed on the board.
Yes, the E750 has only one ethernet port,
In E750, we only use GMAC0, but in ATH79 target, I had to initialize
P4 via GMAC1 connected to the Ethernet switch, so you'll see eth0 and
eth1 on your system.
I have tried to use GMAC0 to initialize P4 directly, but after
initializing P4 in this way, the speed of P4 can only be 100M, not
100M/10M.
------------------------------------------------------------------------
*/Best Regards/*
Hi Chongjun,
Thanks for the details.
Could you send a V3 to ensure ethernet is working?
Currently, there seems to be a mismatch and I suspect the wrong eth is
being assigned with an IP.
Basically, the device is totally unreachable with the current patchset.
Thanks for your efforts,
Koen
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
