Hi, > -----Original Message----- > From: openwrt-devel [mailto:[email protected]] > On Behalf Of David Bauer > Sent: Dienstag, 16. Februar 2021 23:48 > To: [email protected] > Subject: [PATCH] mpc85xx-p1010: add Kernel 5.10 support
no offense, but I wonder whether bumping by subtargets is really the way to go here? Best Adrian > > Tested on: Sophos RED 15W > > The TP-Link WL-WDR4900 needs to be disabled when 5.10 becomes the > default kernel. > > When building with all kmods enabled, the resulting kernel image exceeds > the maximum size the bootloader reads from the flash. > > For more information, see GitHub issue #1773 > > Signed-off-by: David Bauer <[email protected]> > --- > target/linux/mpc85xx/config-5.10 | 280 ++++++++++++++++++ > target/linux/mpc85xx/p1010/target.mk | 2 + > ...85xx-add-gpio-keys-to-of-match-table.patch | 10 + ...0-powerpc-85xx-tl- > wdr4900-v1-support.patch | 83 ++++++ .../101-powerpc-85xx-hiveap-330- > support.patch | 30 ++ > .../102-powerpc-add-cmdline-override.patch | 37 +++ > .../103-powerpc-85xx-red-15w-rev1.patch | 29 ++ > ...change-P2020RDB-dts-file-for-OpenWRT.patch | 162 ++++++++++ > .../105-powerpc-85xx-panda-support.patch | 30 ++ > .../106-powerpc-85xx-ws-ap3710i-support.patch | 30 ++ ...ootwrapper- > disable-uImage-generation.patch | 42 +++ > 11 files changed, 735 insertions(+) > create mode 100644 target/linux/mpc85xx/config-5.10 create mode 100644 > target/linux/mpc85xx/patches-5.10/001-powerpc-85xx-add-gpio-keys-to-of- > match-table.patch > create mode 100644 target/linux/mpc85xx/patches-5.10/100-powerpc-85xx- > tl-wdr4900-v1-support.patch > create mode 100644 target/linux/mpc85xx/patches-5.10/101-powerpc-85xx- > hiveap-330-support.patch > create mode 100644 target/linux/mpc85xx/patches-5.10/102-powerpc-add- > cmdline-override.patch > create mode 100644 target/linux/mpc85xx/patches-5.10/103-powerpc-85xx- > red-15w-rev1.patch > create mode 100644 target/linux/mpc85xx/patches-5.10/104-powerpc- > mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch > create mode 100644 target/linux/mpc85xx/patches-5.10/105-powerpc-85xx- > panda-support.patch > create mode 100644 target/linux/mpc85xx/patches-5.10/106-powerpc-85xx- > ws-ap3710i-support.patch > create mode 100644 target/linux/mpc85xx/patches-5.10/900-powerpc- > bootwrapper-disable-uImage-generation.patch > > diff --git a/target/linux/mpc85xx/config-5.10 b/target/linux/mpc85xx/config- > 5.10 > new file mode 100644 > index 0000000000..cb0d08ba91 > --- /dev/null > +++ b/target/linux/mpc85xx/config-5.10 > @@ -0,0 +1,280 @@ > +# CONFIG_40x is not set > +# CONFIG_44x is not set > +# CONFIG_ADVANCED_OPTIONS is not set > +CONFIG_AR8216_PHY=y > +CONFIG_AR8216_PHY_LEDS=y > +CONFIG_ARCH_32BIT_OFF_T=y > +CONFIG_ARCH_HIBERNATION_POSSIBLE=y > +CONFIG_ARCH_KEEP_MEMBLOCK=y > +CONFIG_ARCH_MAY_HAVE_PC_FDC=y > +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y > +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y > +CONFIG_ARCH_MMAP_RND_BITS=11 > +CONFIG_ARCH_MMAP_RND_BITS_MAX=17 > +CONFIG_ARCH_MMAP_RND_BITS_MIN=11 > +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17 > +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 > +CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y > +CONFIG_ARCH_SUSPEND_POSSIBLE=y > +CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y > +CONFIG_ASN1=y > +CONFIG_AUDIT_ARCH=y > +CONFIG_BLK_MQ_PCI=y > +CONFIG_BOOKE=y > +CONFIG_BOOKE_WDT=y > +# CONFIG_BSC9131_RDB is not set > +# CONFIG_BSC9132_QDS is not set > +# CONFIG_C293_PCIE is not set > +CONFIG_CLONE_BACKWARDS=y > +CONFIG_CLZ_TAB=y > +CONFIG_CMDLINE="console=ttyS0,115200" > +CONFIG_CMDLINE_FROM_BOOTLOADER=y > +# CONFIG_CMDLINE_OVERRIDE is not set > +# CONFIG_COMMON_CLK is not set > +CONFIG_COMPAT_32BIT_TIME=y > +# CONFIG_CORENET_GENERIC is not set > +# CONFIG_CPM2 is not set > +CONFIG_CPU_BIG_ENDIAN=y > +CONFIG_CRYPTO_AEAD=y > +CONFIG_CRYPTO_AEAD2=y > +# CONFIG_CRYPTO_AES_PPC_SPE is not set > +CONFIG_CRYPTO_AKCIPHER=y > +CONFIG_CRYPTO_AKCIPHER2=y > +CONFIG_CRYPTO_AUTHENC=y > +CONFIG_CRYPTO_HASH=y > +CONFIG_CRYPTO_HASH2=y > +CONFIG_CRYPTO_HW=y > +CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1 > +CONFIG_CRYPTO_MANAGER=y > +CONFIG_CRYPTO_MANAGER2=y > +# CONFIG_CRYPTO_MD5_PPC is not set > +CONFIG_CRYPTO_NULL=y > +CONFIG_CRYPTO_NULL2=y > +CONFIG_CRYPTO_RNG=y > +CONFIG_CRYPTO_RNG2=y > +CONFIG_CRYPTO_RSA=y > +# CONFIG_CRYPTO_SHA1_PPC is not set > +# CONFIG_CRYPTO_SHA1_PPC_SPE is not set # > CONFIG_CRYPTO_SHA256_PPC_SPE > +is not set > +CONFIG_DATA_SHIFT=12 > +CONFIG_DEBUG_BUGVERBOSE=y > +CONFIG_DNOTIFY=y > +CONFIG_DTC=y > +# CONFIG_E200 is not set > +CONFIG_E500=y > +# CONFIG_E5500_CPU is not set > +# CONFIG_E6500_CPU is not set > +CONFIG_EARLY_PRINTK=y > +CONFIG_EDAC_ATOMIC_SCRUB=y > +CONFIG_EDAC_SUPPORT=y > +CONFIG_ENABLE_MUST_CHECK=y > +CONFIG_FIXED_PHY=y > +CONFIG_FSL_BOOKE=y > +CONFIG_FSL_EMB_PERFMON=y > +# CONFIG_FSL_ENETC_MDIO is not set > +# CONFIG_FSL_FMAN is not set > +CONFIG_FSL_LBC=y > +CONFIG_FSL_PCI=y > +CONFIG_FSL_PQ_MDIO=y > +CONFIG_FSL_SOC=y > +CONFIG_FSL_SOC_BOOKE=y > +CONFIG_FW_LOADER_PAGED_BUF=y > +CONFIG_GENERIC_ALLOCATOR=y > +CONFIG_GENERIC_ATOMIC64=y > +CONFIG_GENERIC_BUG=y > +CONFIG_GENERIC_CLOCKEVENTS=y > +CONFIG_GENERIC_CMOS_UPDATE=y > +CONFIG_GENERIC_CPU=y > +CONFIG_GENERIC_CPU_AUTOPROBE=y > +CONFIG_GENERIC_CPU_VULNERABILITIES=y > +CONFIG_GENERIC_EARLY_IOREMAP=y > +CONFIG_GENERIC_IRQ_SHOW=y > +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y > +CONFIG_GENERIC_ISA_DMA=y > +CONFIG_GENERIC_PCI_IOMAP=y > +CONFIG_GENERIC_SMP_IDLE_THREAD=y > +CONFIG_GENERIC_STRNCPY_FROM_USER=y > +CONFIG_GENERIC_STRNLEN_USER=y > +CONFIG_GENERIC_TIME_VSYSCALL=y > +CONFIG_GEN_RTC=y > +# CONFIG_GE_IMP3A is not set > +CONFIG_GIANFAR=y > +CONFIG_GPIOLIB=y > +CONFIG_GPIO_GENERIC=y > +CONFIG_GPIO_MPC8XXX=y > +CONFIG_HAS_DMA=y > +CONFIG_HAS_IOMEM=y > +CONFIG_HAS_IOPORT_MAP=y > +# CONFIG_HIVEAP_330 is not set > +CONFIG_HW_RANDOM=y > +# CONFIG_HW_RANDOM_XIPHERA is not set > +CONFIG_HZ=250 > +CONFIG_HZ_250=y > +CONFIG_HZ_PERIODIC=y > +CONFIG_I2C=y > +CONFIG_I2C_BOARDINFO=y > +CONFIG_I2C_MPC=y > +CONFIG_ILLEGAL_POINTER_VALUE=0 > +CONFIG_INITRAMFS_SOURCE="" > +CONFIG_IRQCHIP=y > +CONFIG_IRQ_DOMAIN=y > +CONFIG_IRQ_FORCED_THREADING=y > +CONFIG_IRQ_WORK=y > +CONFIG_ISA_DMA_API=y > +CONFIG_KERNEL_START=0xc0000000 > +# CONFIG_KSI8560 is not set > +CONFIG_LEGACY_PTYS=y > +CONFIG_LEGACY_PTY_COUNT=256 > +CONFIG_LIBFDT=y > +CONFIG_LLD_VERSION=0 > +CONFIG_LOCK_DEBUGGING_SUPPORT=y > +CONFIG_LOWMEM_CAM_NUM=3 > +CONFIG_LOWMEM_SIZE=0x30000000 > +CONFIG_LXT_PHY=y > +# CONFIG_MATH_EMULATION is not set > +CONFIG_MDIO_BUS=y > +CONFIG_MDIO_DEVICE=y > +CONFIG_MEMFD_CREATE=y > +# CONFIG_MFD_ROHM_BD71828 is not set > +CONFIG_MIGRATION=y > +CONFIG_MMU_GATHER_PAGE_SIZE=y > +CONFIG_MODULES_USE_ELF_RELA=y > +# CONFIG_MPC8536_DS is not set > +# CONFIG_MPC8540_ADS is not set > +# CONFIG_MPC8560_ADS is not set > +# CONFIG_MPC85xx_CDS is not set > +# CONFIG_MPC85xx_DS is not set > +# CONFIG_MPC85xx_MDS is not set > +# CONFIG_MPC85xx_RDB is not set > +CONFIG_MPIC=y > +# CONFIG_MPIC_MSGR is not set > +CONFIG_MPIC_TIMER=y > +CONFIG_MPILIB=y > +# CONFIG_MTD_CFI is not set > +CONFIG_MTD_NAND_CORE=y > +CONFIG_MTD_NAND_ECC=y > +CONFIG_MTD_NAND_ECC_SW_HAMMING=y > +CONFIG_MTD_RAW_NAND=y > +CONFIG_MTD_SPI_NOR=y > +# CONFIG_MVME2500 is not set > +CONFIG_NEED_PER_CPU_KM=y > +CONFIG_NEED_SG_DMA_LENGTH=y > +CONFIG_NLS=y > +CONFIG_NR_IRQS=512 > +CONFIG_NVMEM=y > +CONFIG_OF=y > +CONFIG_OF_ADDRESS=y > +CONFIG_OF_DMA_DEFAULT_COHERENT=y > +CONFIG_OF_EARLY_FLATTREE=y > +CONFIG_OF_FLATTREE=y > +CONFIG_OF_GPIO=y > +CONFIG_OF_IRQ=y > +CONFIG_OF_KOBJ=y > +CONFIG_OF_MDIO=y > +CONFIG_OF_NET=y > +CONFIG_OLD_SIGACTION=y > +CONFIG_OLD_SIGSUSPEND=y > +# CONFIG_P1010_RDB is not set > +# CONFIG_P1022_DS is not set > +# CONFIG_P1022_RDK is not set > +# CONFIG_P1023_RDB is not set > +CONFIG_PAGE_OFFSET=0xc0000000 > +# CONFIG_PANDA is not set > +CONFIG_PCI=y > +CONFIG_PCIEAER=y > +CONFIG_PCIEASPM=y > +CONFIG_PCIEASPM_DEFAULT=y > +# CONFIG_PCIEASPM_PERFORMANCE is not set # > CONFIG_PCIEASPM_POWERSAVE is > +not set # CONFIG_PCIEASPM_POWER_SUPERSAVE is not set > +CONFIG_PCIEPORTBUS=y CONFIG_PCI_DOMAINS=y > +CONFIG_PGTABLE_LEVELS=2 > +CONFIG_PHYLIB=y > +CONFIG_PHYSICAL_ALIGN=0x04000000 > +CONFIG_PHYSICAL_START=0x00000000 > +# CONFIG_PHYS_64BIT is not set > +# CONFIG_PMU_SYSFS is not set > +# CONFIG_PPA8548 is not set > +CONFIG_PPC=y > +CONFIG_PPC32=y > +# CONFIG_PPC64 is not set > +CONFIG_PPC_85xx=y > +# CONFIG_PPC_8xx is not set > +CONFIG_PPC_ADV_DEBUG_DACS=2 > +CONFIG_PPC_ADV_DEBUG_DVCS=0 > +CONFIG_PPC_ADV_DEBUG_IACS=2 > +CONFIG_PPC_ADV_DEBUG_REGS=y > +CONFIG_PPC_BARRIER_NOSPEC=y > +CONFIG_PPC_BOOK3E_MMU=y > +# CONFIG_PPC_BOOK3S_6xx is not set > +CONFIG_PPC_DOORBELL=y > +# CONFIG_PPC_E500MC is not set > +# CONFIG_PPC_EARLY_DEBUG is not set > +CONFIG_PPC_FSL_BOOK3E=y > +CONFIG_PPC_INDIRECT_PCI=y > +# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set > CONFIG_PPC_MMU_NOHASH=y > +CONFIG_PPC_MMU_NOHASH_32=y > +CONFIG_PPC_PAGE_SHIFT=12 > +# CONFIG_PPC_PTDUMP is not set > +# CONFIG_PPC_QEMU_E500 is not set > +CONFIG_PPC_SMP_MUXED_IPI=y > +CONFIG_PPC_UDBG_16550=y > +CONFIG_PPC_WERROR=y > +CONFIG_QE_GPIO=y > +CONFIG_QUICC_ENGINE=y > +CONFIG_RAS=y > +# CONFIG_RED_15W_REV1 is not set > +CONFIG_RTC_CLASS=y > +CONFIG_RTC_DRV_GENERIC=y > +# CONFIG_RTC_DRV_RV3032 is not set > +CONFIG_RTC_I2C_AND_SPI=y > +CONFIG_RTC_MC146818_LIB=y > +# CONFIG_SBC8548 is not set > +# CONFIG_SCOM_DEBUGFS is not set > +CONFIG_SERIAL_8250_EXTENDED=y > +CONFIG_SERIAL_8250_FSL=y > +CONFIG_SERIAL_8250_SHARE_IRQ=y > +CONFIG_SERIAL_MCTRL_GPIO=y > +CONFIG_SERIAL_OF_PLATFORM=y > +# CONFIG_SERIAL_QE is not set > +# CONFIG_SOCRATES is not set > +CONFIG_SPARSE_IRQ=y > +CONFIG_SPE=y > +CONFIG_SPE_POSSIBLE=y > +CONFIG_SPI=y > +CONFIG_SPI_FSL_ESPI=y > +CONFIG_SPI_MASTER=y > +CONFIG_SPI_MEM=y > +CONFIG_SRCU=y > +# CONFIG_STRIP_ASM_SYMS is not set > +# CONFIG_STX_GP3 is not set > +CONFIG_SWCONFIG=y > +CONFIG_SWPHY=y > +CONFIG_SYSCTL_EXCEPTION_TRACE=y > +CONFIG_TASK_SIZE=0xc0000000 > +CONFIG_THREAD_INFO_IN_TASK=y > +CONFIG_THREAD_SHIFT=13 > +CONFIG_TICK_CPU_ACCOUNTING=y > +CONFIG_TINY_SRCU=y > +# CONFIG_TL_WDR4900_V1 is not set > +# CONFIG_TQM8540 is not set > +# CONFIG_TQM8541 is not set > +# CONFIG_TQM8548 is not set > +# CONFIG_TQM8555 is not set > +# CONFIG_TQM8560 is not set > +# CONFIG_TWR_P102x is not set > +CONFIG_UCC=y > +CONFIG_UCC_FAST=y > +CONFIG_UCC_GETH=y > +# CONFIG_UGETH_TX_ON_DEMAND is not set > +CONFIG_USB_SUPPORT=y > +CONFIG_VDSO32=y > +# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set > +CONFIG_VM_EVENT_COUNTERS=y CONFIG_WATCHDOG_CORE=y # > CONFIG_WS_AP3710I > +is not set # CONFIG_XES_MPC85xx is not set CONFIG_XZ_DEC_BCJ=y > +CONFIG_XZ_DEC_POWERPC=y > diff --git a/target/linux/mpc85xx/p1010/target.mk > b/target/linux/mpc85xx/p1010/target.mk > index 12ed78ace1..1140a325b6 100644 > --- a/target/linux/mpc85xx/p1010/target.mk > +++ b/target/linux/mpc85xx/p1010/target.mk > @@ -2,6 +2,8 @@ BOARDNAME:=P1010 > FEATURES+=nand > KERNELNAME:=simpleImage.tl-wdr4900-v1 > > +KERNEL_TESTING_PATCHVER:=5.10 > + > define Target/Description > Build firmware images for P1010 based boards. > endef > diff --git a/target/linux/mpc85xx/patches-5.10/001-powerpc-85xx-add-gpio- > keys-to-of-match-table.patch b/target/linux/mpc85xx/patches-5.10/001- > powerpc-85xx-add-gpio-keys-to-of-match-table.patch > new file mode 100644 > index 0000000000..5e5ab10daf > --- /dev/null > +++ b/target/linux/mpc85xx/patches-5.10/001-powerpc-85xx-add-gpio- > keys-t > +++ o-of-match-table.patch > @@ -0,0 +1,10 @@ > +--- a/arch/powerpc/platforms/85xx/common.c > ++++ b/arch/powerpc/platforms/85xx/common.c > +@@ -30,6 +30,7 @@ static const struct of_device_id mpc85xx > + { .compatible = "fsl,mpc8548-guts", }, > + /* Probably unnecessary? */ > + { .compatible = "gpio-leds", }, > ++ { .compatible = "gpio-keys", }, > + /* For all PCI controllers */ > + { .compatible = "fsl,mpc8540-pci", }, > + { .compatible = "fsl,mpc8548-pcie", }, > diff --git a/target/linux/mpc85xx/patches-5.10/100-powerpc-85xx-tl- > wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-5.10/100- > powerpc-85xx-tl-wdr4900-v1-support.patch > new file mode 100644 > index 0000000000..4da431ec23 > --- /dev/null > +++ b/target/linux/mpc85xx/patches-5.10/100-powerpc-85xx-tl-wdr4900-v1- > s > +++ upport.patch > @@ -0,0 +1,83 @@ > +From 1d9f596e572917772b87a2a37e1680902964782f Mon Sep 17 00:00:00 > 2001 > +From: Gabor Juhos <[email protected]> > +Date: Wed, 20 Feb 2013 08:40:33 +0100 > +Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 > +v1 board > + > +This patch adds support for the TP-Link TL-WDR4900 v1 concurrent > +dual-band wireless router. The devices uses the Freescale P1014 SoC. > + > +Signed-off-by: Gabor Juhos <[email protected]> > +Signed-off-by: Pawel Dembicki <[email protected]> > +--- > + arch/powerpc/boot/Makefile | 3 ++- > + arch/powerpc/boot/wrapper | 5 +++++ > + arch/powerpc/platforms/85xx/Kconfig | 12 ++++++++++++ > +arch/powerpc/platforms/85xx/Makefile | 1 + > + 4 files changed, 20 insertions(+), 1 deletion(-) > + > +--- a/arch/powerpc/boot/Makefile > ++++ b/arch/powerpc/boot/Makefile > +@@ -157,6 +157,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie > + src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S > + src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S > + src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c > ++src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S > + > + src-wlib := $(sort $(src-wlib-y)) > + src-plat := $(sort $(src-plat-y)) > +@@ -336,7 +337,7 @@ image-$(CONFIG_TQM8555) += > cuImage.tqm > + image-$(CONFIG_TQM8560) += cuImage.tqm8560 > + image-$(CONFIG_SBC8548) += cuImage.sbc8548 > + image-$(CONFIG_KSI8560) += cuImage.ksi8560 > +- > ++image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl- > wdr4900-v1 > + # Board ports in arch/powerpc/platform/86xx/Kconfig > + image-$(CONFIG_MVME7100) += dtbImage.mvme7100 > + > +--- a/arch/powerpc/boot/wrapper > ++++ b/arch/powerpc/boot/wrapper > +@@ -324,6 +324,11 @@ adder875-redboot) > + platformo="$object/fixed-head.o $object/redboot-8xx.o" > + binary=y > + ;; > ++simpleboot-tl-wdr4900-v1) > ++ platformo="$object/fixed-head.o $object/simpleboot.o" > ++ link_address='0x1000000' > ++ binary=y > ++ ;; > + simpleboot-*) > + platformo="$object/fixed-head.o $object/simpleboot.o" > + binary=y > +--- a/arch/powerpc/platforms/85xx/Kconfig > ++++ b/arch/powerpc/platforms/85xx/Kconfig > +@@ -170,6 +170,18 @@ config STX_GP3 > + select CPM2 > + select DEFAULT_UIMAGE > + > ++config TL_WDR4900_V1 > ++ bool "TP-Link TL-WDR4900 v1" > ++ select DEFAULT_UIMAGE > ++ select ARCH_REQUIRE_GPIOLIB > ++ select GPIO_MPC8XXX > ++ select SWIOTLB > ++ help > ++ This option enables support for the TP-Link TL-WDR4900 v1 board. > ++ > ++ This board is a Concurrent Dual-Band wireless router with a > ++ Freescale P1014 SoC. > ++ > + config TQM8540 > + bool "TQ Components TQM8540" > + help > +--- a/arch/powerpc/platforms/85xx/Makefile > ++++ b/arch/powerpc/platforms/85xx/Makefile > +@@ -26,6 +26,7 @@ obj-$(CONFIG_CORENET_GENERIC) += coren > + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o > + obj-$(CONFIG_STX_GP3) += stx_gp3.o > + obj-$(CONFIG_TQM85xx) += tqm85xx.o > ++obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o > + obj-$(CONFIG_SBC8548) += sbc8548.o > + obj-$(CONFIG_PPA8548) += ppa8548.o > + obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o > diff --git a/target/linux/mpc85xx/patches-5.10/101-powerpc-85xx-hiveap- > 330-support.patch b/target/linux/mpc85xx/patches-5.10/101-powerpc-85xx- > hiveap-330-support.patch > new file mode 100644 > index 0000000000..34568398c2 > --- /dev/null > +++ b/target/linux/mpc85xx/patches-5.10/101-powerpc-85xx-hiveap-330- > supp > +++ ort.patch > @@ -0,0 +1,30 @@ > +--- a/arch/powerpc/platforms/85xx/Kconfig > ++++ b/arch/powerpc/platforms/85xx/Kconfig > +@@ -49,6 +49,17 @@ config BSC9132_QDS > + and dual StarCore SC3850 DSP cores. > + Manufacturer : Freescale Semiconductor, Inc > + > ++config HIVEAP_330 > ++ bool "Aerohive HiveAP-330" > ++ select DEFAULT_UIMAGE > ++ select ARCH_REQUIRE_GPIOLIB > ++ select GPIO_MPC8XXX > ++ help > ++ This option enables support for the Aerohive HiveAP-330 board. > ++ > ++ This board is a Concurrent Dual-Band wireless access point with a > ++ Freescale P1020 SoC. > ++ > + config MPC8540_ADS > + bool "Freescale MPC8540 ADS" > + select DEFAULT_UIMAGE > +--- a/arch/powerpc/platforms/85xx/Makefile > ++++ b/arch/powerpc/platforms/85xx/Makefile > +@@ -10,6 +10,7 @@ obj-y += common.o > + obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o > + obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o > + obj-$(CONFIG_C293_PCIE) += c293pcie.o > ++obj-$(CONFIG_HIVEAP_330) += hiveap-330.o > + obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o > + obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o > + obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o > diff --git a/target/linux/mpc85xx/patches-5.10/102-powerpc-add-cmdline- > override.patch b/target/linux/mpc85xx/patches-5.10/102-powerpc-add- > cmdline-override.patch > new file mode 100644 > index 0000000000..924ce9307e > --- /dev/null > +++ b/target/linux/mpc85xx/patches-5.10/102-powerpc-add-cmdline- > override > +++ .patch > @@ -0,0 +1,37 @@ > +--- a/arch/powerpc/Kconfig > ++++ b/arch/powerpc/Kconfig > +@@ -885,6 +885,14 @@ config CMDLINE_FORCE > + This is useful if you cannot or don't want to change the > + command-line options your boot loader passes to the kernel. > + > ++config CMDLINE_OVERRIDE > ++ bool "Use alternative cmdline from device tree" > ++ help > ++ Some bootloaders may have uneditable bootargs. While > CMDLINE_FORCE can > ++ be used, this is not a good option for kernels that are shared across > ++ devices. This setting enables using "chosen/cmdline-override" as the > ++ cmdline if it exists in the device tree. > ++ > + config EXTRA_TARGETS > + string "Additional default image types" > + help > +--- a/drivers/of/fdt.c > ++++ b/drivers/of/fdt.c > +@@ -1060,6 +1060,17 @@ int __init early_init_dt_scan_chosen(uns > + if (p != NULL && l > 0) > + strlcpy(data, p, min(l, COMMAND_LINE_SIZE)); > + > ++ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different > ++ * device tree option of chosen/bootargs-override. This is > ++ * helpful on boards where u-boot sets bootargs, and is unable > ++ * to be modified. > ++ */ > ++#ifdef CONFIG_CMDLINE_OVERRIDE > ++ p = of_get_flat_dt_prop(node, "bootargs-override", &l); > ++ if (p != NULL && l > 0) > ++ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); #endif > ++ > + /* > + * CONFIG_CMDLINE is meant to be a default in case nothing else > + * managed to set the command line, unless > CONFIG_CMDLINE_FORCE > diff --git a/target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red-15w- > rev1.patch b/target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red- > 15w-rev1.patch > new file mode 100644 > index 0000000000..b84a56659c > --- /dev/null > +++ b/target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red-15w- > rev1.pa > +++ tch > @@ -0,0 +1,29 @@ > +--- a/arch/powerpc/platforms/85xx/Kconfig > ++++ b/arch/powerpc/platforms/85xx/Kconfig > +@@ -173,6 +173,16 @@ config XES_MPC85xx > + Manufacturer: Extreme Engineering Solutions, Inc. > + URL: <http://www.xes-inc.com/> > + > ++config RED_15W_REV1 > ++ bool "Sophos RED 15w Rev.1" > ++ select DEFAULT_UIMAGE > ++ select ARCH_REQUIRE_GPIOLIB > ++ select GPIO_MPC8XXX > ++ help > ++ This option enables support for the Sophos RED 15w Rev.1 board. > ++ > ++ This board is a wireless VPN router with a Freescale P1010 SoC. > ++ > + config STX_GP3 > + bool "Silicon Turnkey Express GP3" > + help > +--- a/arch/powerpc/platforms/85xx/Makefile > ++++ b/arch/powerpc/platforms/85xx/Makefile > +@@ -25,6 +25,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o > + obj-$(CONFIG_TWR_P102x) += twr_p102x.o > + obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o > + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o > ++obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o > + obj-$(CONFIG_STX_GP3) += stx_gp3.o > + obj-$(CONFIG_TQM85xx) += tqm85xx.o > + obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o > diff --git a/target/linux/mpc85xx/patches-5.10/104-powerpc-mpc85xx- > change-P2020RDB-dts-file-for-OpenWRT.patch > b/target/linux/mpc85xx/patches-5.10/104-powerpc-mpc85xx-change- > P2020RDB-dts-file-for-OpenWRT.patch > new file mode 100644 > index 0000000000..a22f251077 > --- /dev/null > +++ b/target/linux/mpc85xx/patches-5.10/104-powerpc-mpc85xx-change- > P2020 > +++ RDB-dts-file-for-OpenWRT.patch > @@ -0,0 +1,162 @@ > +From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 > 2001 > +From: Pawel Dembicki <[email protected]> > +Date: Sun, 30 Dec 2018 23:24:41 +0100 > +Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for > OpenWRT > + > +This patch apply chages for OpenWRT in P2020RDB dts file. > + > +Signed-off-by: Pawel Dembicki <[email protected]> > +--- > + arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++-------- > - > + 1 file changed, 63 insertions(+), 35 deletions(-) > + > +--- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts > ++++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts > +@@ -5,10 +5,15 @@ > + * Copyright 2009-2012 Freescale Semiconductor Inc. > + */ > + > ++/dts-v1/; > ++ > + /include/ "p2020si-pre.dtsi" > + > ++#include <dt-bindings/gpio/gpio.h> > ++#include <dt-bindings/input/input.h> > ++ > + / { > +- model = "fsl,P2020RDB"; > ++ model = "Freescale P2020RDB"; > + compatible = "fsl,P2020RDB"; > + > + aliases { > +@@ -34,48 +39,38 @@ > + 0x2 0x0 0x0 0xffb00000 0x00020000>; > + > + nor@0,0 { > +- #address-cells = <1>; > +- #size-cells = <1>; > + compatible = "cfi-flash"; > + reg = <0x0 0x0 0x1000000>; > + bank-width = <2>; > + device-width = <1>; > + > +- partition@0 { > +- /* This location must not be altered */ > +- /* 256KB for Vitesse 7385 Switch firmware */ > +- reg = <0x0 0x00040000>; > +- label = "NOR (RO) Vitesse-7385 Firmware"; > +- read-only; > +- }; > +- > +- partition@40000 { > +- /* 256KB for DTB Image */ > +- reg = <0x00040000 0x00040000>; > +- label = "NOR (RO) DTB Image"; > +- read-only; > +- }; > ++ partitions { > ++ compatible = "fixed-partitions"; > ++ #address-cells = <1>; > ++ #size-cells = <1>; > + > +- partition@80000 { > +- /* 3.5 MB for Linux Kernel Image */ > +- reg = <0x00080000 0x00380000>; > +- label = "NOR (RO) Linux Kernel Image"; > +- read-only; > +- }; > ++ partition@0 { > ++ /* This location must not be altered > */ > ++ /* 256KB for Vitesse 7385 Switch > firmware */ > ++ reg = <0x0 0x00040000>; > ++ label = "NOR (RO) Vitesse-7385 > Firmware"; > ++ read-only; > ++ }; > + > +- partition@400000 { > +- /* 11MB for JFFS2 based Root file System */ > +- reg = <0x00400000 0x00b00000>; > +- label = "NOR (RW) JFFS2 Root File System"; > +- }; > ++ partition@40000 { > ++ compatible = "denx,fit"; > ++ reg = <0x00040000 0x00ec0000>; > ++ label = "firmware"; > ++ }; > + > +- partition@f00000 { > +- /* This location must not be altered */ > +- /* 512KB for u-boot Bootloader Image */ > +- /* 512KB for u-boot Environment Variables */ > +- reg = <0x00f00000 0x00100000>; > +- label = "NOR (RO) U-Boot Image"; > +- read-only; > ++ partition@f00000 { > ++ /* This location must not be altered > */ > ++ /* 512KB for u-boot Bootloader Image > */ > ++ /* 512KB for u-boot Environment > Variables */ > ++ reg = <0x00f00000 0x00100000>; > ++ label = "u-boot"; > ++ read-only; > ++ }; > + }; > + }; > + > +@@ -140,13 +135,43 @@ > + soc: soc@ffe00000 { > + ranges = <0x0 0x0 0xffe00000 0x100000>; > + > ++ gpio0: gpio-controller@fc00 { > ++ }; > ++ > + i2c@3000 { > ++ temperature-sensor@4c { > ++ compatible = "adi,adt7461"; > ++ reg = <0x4c>; > ++ }; > ++ > ++ eeprom@50 { > ++ compatible = "atmel,24c256"; > ++ reg = <0x50>; > ++ }; > ++ > + rtc@68 { > + compatible = "dallas,ds1339"; > + reg = <0x68>; > + }; > + }; > + > ++ i2c@3100 { > ++ pmic@11 { > ++ compatible = "zl2006"; > ++ reg = <0x11>; > ++ }; > ++ > ++ gpio@18 { > ++ compatible = "nxp,pca9557"; > ++ reg = <0x18>; > ++ }; > ++ > ++ eeprom@52 { > ++ compatible = "atmel,24c01"; > ++ reg = <0x52>; > ++ }; > ++ }; > ++ > + spi@7000 { > + flash@0 { > + #address-cells = <1>; > +@@ -200,10 +225,12 @@ > + phy0: ethernet-phy@0 { > + interrupts = <3 1 0 0>; > + reg = <0x0>; > ++ reset-gpios = <&gpio0 14 > GPIO_ACTIVE_LOW>; > + }; > + phy1: ethernet-phy@1 { > + interrupts = <3 1 0 0>; > + reg = <0x1>; > ++ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; > + }; > + tbi-phy@2 { > + device_type = "tbi-phy"; > diff --git a/target/linux/mpc85xx/patches-5.10/105-powerpc-85xx-panda- > support.patch b/target/linux/mpc85xx/patches-5.10/105-powerpc-85xx- > panda-support.patch > new file mode 100644 > index 0000000000..a08bc302f2 > --- /dev/null > +++ b/target/linux/mpc85xx/patches-5.10/105-powerpc-85xx-panda- > support.p > +++ atch > @@ -0,0 +1,30 @@ > +--- a/arch/powerpc/platforms/85xx/Kconfig > ++++ b/arch/powerpc/platforms/85xx/Kconfig > +@@ -60,6 +60,17 @@ config HIVEAP_330 > + This board is a Concurrent Dual-Band wireless access point with a > + Freescale P1020 SoC. > + > ++config PANDA > ++ bool "OCEDO PANDA" > ++ select DEFAULT_UIMAGE > ++ select ARCH_REQUIRE_GPIOLIB > ++ select GPIO_MPC8XXX > ++ help > ++ This option enables support for the OCEDO PANDA board. > ++ > ++ This board is a Concurrent Dual-Band wireless access point with a > ++ Freescale P1020 SoC. > ++ > + config MPC8540_ADS > + bool "Freescale MPC8540 ADS" > + select DEFAULT_UIMAGE > +--- a/arch/powerpc/platforms/85xx/Makefile > ++++ b/arch/powerpc/platforms/85xx/Makefile > +@@ -22,6 +22,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o > + obj-$(CONFIG_P1022_DS) += p1022_ds.o > + obj-$(CONFIG_P1022_RDK) += p1022_rdk.o > + obj-$(CONFIG_P1023_RDB) += p1023_rdb.o > ++obj-$(CONFIG_PANDA) += panda.o > + obj-$(CONFIG_TWR_P102x) += twr_p102x.o > + obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o > + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o > diff --git a/target/linux/mpc85xx/patches-5.10/106-powerpc-85xx-ws- > ap3710i-support.patch b/target/linux/mpc85xx/patches-5.10/106-powerpc- > 85xx-ws-ap3710i-support.patch > new file mode 100644 > index 0000000000..4bacedbcd7 > --- /dev/null > +++ b/target/linux/mpc85xx/patches-5.10/106-powerpc-85xx-ws-ap3710i- > supp > +++ ort.patch > @@ -0,0 +1,30 @@ > +--- a/arch/powerpc/platforms/85xx/Kconfig > ++++ b/arch/powerpc/platforms/85xx/Kconfig > +@@ -71,6 +71,17 @@ config PANDA > + This board is a Concurrent Dual-Band wireless access point with a > + Freescale P1020 SoC. > + > ++config WS_AP3710I > ++ bool "Enterasys WS-AP3710i" > ++ select DEFAULT_UIMAGE > ++ select ARCH_REQUIRE_GPIOLIB > ++ select GPIO_MPC8XXX > ++ help > ++ This option enables support for the Enterasys WS-AP3710i board. > ++ > ++ This board is a Concurrent Dual-Band wireless access point with a > ++ Freescale P1020 SoC. > ++ > + config MPC8540_ADS > + bool "Freescale MPC8540 ADS" > + select DEFAULT_UIMAGE > +--- a/arch/powerpc/platforms/85xx/Makefile > ++++ b/arch/powerpc/platforms/85xx/Makefile > +@@ -24,6 +24,7 @@ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o > + obj-$(CONFIG_P1023_RDB) += p1023_rdb.o > + obj-$(CONFIG_PANDA) += panda.o > + obj-$(CONFIG_TWR_P102x) += twr_p102x.o > ++obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o > + obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o > + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o > + obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o > diff --git a/target/linux/mpc85xx/patches-5.10/900-powerpc-bootwrapper- > disable-uImage-generation.patch b/target/linux/mpc85xx/patches-5.10/900- > powerpc-bootwrapper-disable-uImage-generation.patch > new file mode 100644 > index 0000000000..2ba3f83326 > --- /dev/null > +++ b/target/linux/mpc85xx/patches-5.10/900-powerpc-bootwrapper- > disable- > +++ uImage-generation.patch > @@ -0,0 +1,42 @@ > +From d43ab14605510d9d2bd257a8cd70f24ada4621b0 Mon Sep 17 00:00:00 > 2001 > +From: David Bauer <[email protected]> > +Date: Sat, 29 Feb 2020 14:27:04 +0100 > +Subject: [PATCH] powerpc: bootwrapper: disable uImage generation > + > +Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to instruct > +the mkimage to use the xz compression, which isn't supported. This > +disables the uImage generation, as OpenWrt generates individual uImages > +for each board using it's own toolchain. > + > +Signed-off-by: David Bauer <[email protected]> > +--- > + arch/powerpc/boot/Makefile | 9 --------- > + 1 file changed, 9 deletions(-) > + > +--- a/arch/powerpc/boot/Makefile > ++++ b/arch/powerpc/boot/Makefile > +@@ -264,7 +264,6 @@ image-$(CONFIG_PPC_CHRP) += > zImage.chrp > + image-$(CONFIG_PPC_EFIKA) += zImage.chrp > + image-$(CONFIG_PPC_PMAC) += zImage.pmac > + image-$(CONFIG_PPC_HOLLY) += dtbImage.holly > +-image-$(CONFIG_DEFAULT_UIMAGE) += uImage > + image-$(CONFIG_EPAPR_BOOT) += zImage.epapr > + > + # > +@@ -395,15 +394,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits > + $(obj)/vmlinux.strip: vmlinux > + $(STRIP) -s -R .comment $< -o $@ > + > +-$(obj)/uImage: vmlinux $(wrapperbits) FORCE > +- $(call if_changed,wrap,uboot) > +- > +-$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE > +- $(call if_changed,wrap,uboot- > $*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) > +- > +-$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE > +- $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb) > +- > + $(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE > + $(call > +if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) > + > -- > 2.30.1 > > > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
openpgp-digital-signature.asc
Description: PGP signature
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
