On 2021-08-16 17:24, Enrico Mioso wrote:
Hello all!!
It's me, again trying to port a device to ath79. And guess where I am
stuck ... in the Ethernet part and switch configuration. :)
The device runs ar71xx, I have the io package installed.
I can get replies from the device, but ping doesn't see them (only
tcpdump), which means something in the timing or data is wrong.
The system is otherwise able to boot.
Can you help, maybe poiting me where I can look?
At the moment I have no UART access to the system, so I was trying to
debug things in ar71xx and take inspiration looking at the DTS files
around.
My guess is that you forgot the switch config, or DSA support.
Look at similar devices. I guess you need some trial and error.
Otherwise, DSA support. Look at other ath79 DSA porting efforts:
https://github.com/openwrt/openwrt/pull/4036
I see eth0 and eth1 in the bootlog, so that's a good thing.
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
