Hello all!!
Well, sorry, I've been unclear about the fact that this dmesg comes from ar71x.
Thanks Paul for the the hints. I tried looking at similar devices, like the hiveap-121,
but s far I had no luck. And so decided it would be best to follow a more
"technical" pproach.
Trials and errors worked well in other cases but I guess this time they may not.
Side note: recovery ath79 image is accepted via tftp.
On Mon, 16 Aug 2021, Paul D wrote:
Date: Mon, 16 Aug 2021 23:16:54
From: Paul D <[email protected]>
To: [email protected]
Subject: Re: ath79 porting of NEtgear R6100
On 2021-08-16 17:24, Enrico Mioso wrote:
Hello all!!
It's me, again trying to port a device to ath79. And guess where I am stuck
... in the Ethernet part and switch configuration. :)
The device runs ar71xx, I have the io package installed.
I can get replies from the device, but ping doesn't see them (only
tcpdump), which means something in the timing or data is wrong.
The system is otherwise able to boot.
Can you help, maybe poiting me where I can look?
At the moment I have no UART access to the system, so I was trying to debug
things in ar71xx and take inspiration looking at the DTS files around.
My guess is that you forgot the switch config, or DSA support.
Look at similar devices. I guess you need some trial and error.
Otherwise, DSA support. Look at other ath79 DSA porting efforts:
https://github.com/openwrt/openwrt/pull/4036
I see eth0 and eth1 in the bootlog, so that's a good thing.
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
