Hi, On Sun, 2021-10-03 at 15:53 +0900, INAGAKI Hiroshi wrote: [...]
> > INAGAKI Hiroshi (3): > realtek: enable pca953x driver for target > realtek: enable gpio-restart driver in target > realtek: add support for Panasonic Switch-M8eG PN28080K > > target/linux/realtek/config-5.10 | 4 + > target/linux/realtek/config-5.4 | 4 + > .../rtl8380_panasonic_m8eg-pn28080k.dts | 103 ++++++++ > .../rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi | 216 +++++++++++++++++ > .../rtl8380_panasonic_m8eg-pn28080k.dts | 107 +++++++++ > .../rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi | 220 ++++++++++++++++++ > target/linux/realtek/image/Makefile | 10 + > 7 files changed, 664 insertions(+) > create mode 100644 > target/linux/realtek/dts-5.10/rtl8380_panasonic_m8eg-pn28080k.dts > create mode 100644 > target/linux/realtek/dts-5.10/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi > create mode 100644 > target/linux/realtek/dts-5.4/rtl8380_panasonic_m8eg-pn28080k.dts > create mode 100644 > target/linux/realtek/dts-5.4/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi I guess this is more a question for the maintainers: Since the realtek target now uses the 5.10 kernel in master, does it still make sense to add support for 5.4? Hiroshi has backported the upstream drivers for 5.10 (thanks again!), so both kernel version now have different quirks. Personnaly, I would prefer not to have to put any energy in 5.4 anymore. Best, Sander _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
