I've provided a patch below that enables VPE support for RTL839x. Since RTL930x
uses the
same CPU architecture, I expect it to also bring up both threads there. Like
you note
RTL930x requires a specific clocksource driver, but it should be possible to
run your
current code for that on top of this (ammended) series.
I will respin the series with some small changes, and add that VSMP-support
patch. Please
let us know if you can get your reworked IRQ driver and timer code working on
top of the
v2. That way, you wouldn't have to take a step back in your development, and we
could
continue providing support through upstream.
just enabling vsmp in that way is not enough. it looks simple and this
is how we started too but you will quickly find out that it will cause
lockups and hangs.
if you do performance tests
in addition the mainline still uses 4kc as cpu architecture, which is
simply wrong for anything else but 838x
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
