Hi Sebastian, On Sun, 2021-12-12 at 00:40 +0100, Sebastian Gottschall wrote: > > > I've provided a patch below that enables VPE support for RTL839x. Since > > RTL930x uses > > the > > same CPU architecture, I expect it to also bring up both threads there. > > Like you note > > RTL930x requires a specific clocksource driver, but it should be possible > > to run your > > current code for that on top of this (ammended) series. > > > > I will respin the series with some small changes, and add that VSMP-support > > patch. > > Please > > let us know if you can get your reworked IRQ driver and timer code working > > on top of > > the > > v2. That way, you wouldn't have to take a step back in your development, > > and we could > > continue providing support through upstream. > just enabling vsmp in that way is not enough. it looks simple and this > is how we started too but you will quickly find out that it will cause > lockups and hangs.
I have not experienced a single lock-up when booting with this patch, but I also didn't stress-test the machine or even used the switch part. Do you guys have more details on why it locks up, or how exactly these lock-ups can be resolved? > if you do performance tests > in addition the mainline still uses 4kc as cpu architecture, which is > simply wrong for anything else but 838x Wrong or suboptimal? I don't currently experience any obvious issues, using the same toolchain for 8380, 8390 and 9300. Best, Sander _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
