These were present in ar71xx but overlooked when porting to ath79.
Fixes: 480bf2827392 ("ath79: add support for Buffalo WZR-HP-AG300H")
Signed-off-by: Jeffery To <[email protected]>
---
target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi
b/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi
index 006755e418..35e083bc61 100644
--- a/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi
+++ b/target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi
@@ -75,24 +75,28 @@
compatible = "gpio-keys";
reset {
+ label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
usb {
+ label = "usb";
linux,code = <BTN_2>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
aoss {
+ label = "aoss";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
router_auto {
+ label = "router_auto";
linux,code = <BTN_6>;
linux,input-type = <EV_SW>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
@@ -100,6 +104,7 @@
};
router_off {
+ label = "router_off";
linux,code = <BTN_5>;
linux,input-type = <EV_SW>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
@@ -107,6 +112,7 @@
};
movie_engine {
+ label = "movie_engine";
linux,code = <BTN_7>;
linux,input-type = <EV_SW>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
--
2.32.0
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
