Add the PCIe node for the ath10k radio to the devicetree, and refer to
the art partition for the calibration data using nvmem-cells.
MAC address assignment is moved to '10_fix_wifi_mac', so the device can
then be removed from the caldata extraction script '11-ath10k-caldata'.
Cc: Sebastian Schaper <open...@sebastianschaper.net>
Signed-off-by: Sander Vanheule <san...@svanheule.net>
---
.../linux/ath79/dts/qca9558_dlink_dap-2680-a1.dts | 14 ++++++++++++++
.../etc/hotplug.d/firmware/11-ath10k-caldata | 6 ------
.../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 7 ++++++-
3 files changed, 20 insertions(+), 7 deletions(-)
diff --git a/target/linux/ath79/dts/qca9558_dlink_dap-2680-a1.dts
b/target/linux/ath79/dts/qca9558_dlink_dap-2680-a1.dts
index 0593fd29f418..09503da52b60 100644
--- a/target/linux/ath79/dts/qca9558_dlink_dap-2680-a1.dts
+++ b/target/linux/ath79/dts/qca9558_dlink_dap-2680-a1.dts
@@ -79,4 +79,18 @@
&pcie0 {
status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+
+ nvmem-cells = <&cal_ath10k>;
+ nvmem-cell-names = "calibration";
+ };
+};
+
+&art {
+ cal_ath10k: calibration@5000 {
+ reg = <0x5000 0x2f20>;
+ };
};
diff --git
a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 668fd76af3a4..74a625ca840c 100644
---
a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++
b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -199,12 +199,6 @@ case "$FIRMWARE" in
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
;;
- dlink,dap-2680-a1)
- caldata_extract "art" 0x5000 0x2f20
- ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
- ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
- /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
- ;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-842-c3)
diff --git
a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index a4f82c54e271..d5a2471a99a9 100644
---
a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++
b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -27,12 +27,17 @@ case "$board" in
mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
;;
dlink,dap-2660-a1|\
- dlink,dap-2680-a1|\
dlink,dap-2695-a1|\
dlink,dap-3662-a1)
[ "$PHYNBR" -eq 1 ] && \
mtd_get_mac_ascii bdcfg "wlanmac" >
/sys${DEVPATH}/macaddress
;;
+ dlink,dap-2680-a1)
+ [ "$PHYNBR" -eq 0 ] && \
+ mtd_get_mac_ascii bdcfg "wlanmac_a" >
/sys${DEVPATH}/macaddress
+ [ "$PHYNBR" -eq 1 ] && \
+ mtd_get_mac_ascii bdcfg "wlanmac" >
/sys${DEVPATH}/macaddress
+ ;;
iodata,wn-ac1600dgr)
# There is no eeprom data for 5 GHz wlan in "art" partition
# which would allow to patch the macaddress
--
2.36.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
