Hi Mark, On 2023/03/02 4:47, Mark Thurston wrote:
---- On Wed, 01 Mar 2023 16:01:50 +0000 INAGAKI Hiroshi wrote --- > Fortinet FortiGate 50E (FG-50E) is a UTM, based on Armada 385 (88F6820). > > Specification: > > - SoC : Marvell Armada 385 88F6820 > - RAM : DDR3 2 GiB (4x Micron MT41K512M8DA-107, "D9SGQ") > - Flash : SPI-NOR 128 MiB (Macronix MX66L1G45GMI-10G) > - Ethernet : 7x 10/100/1000 Mbps > - LAN 1-5 : Marvell 88E6176 > - WAN 1, 2 : Marvell 88E1512 (2x) > - LEDs/Keys : 18x/1x > - UART : "CONSOLE" port (RJ-45, RS-232C level) > - port : ttyS0 > - settings : 9600bps 8n1 > - assignment : 1:NC , 2:NC , 3:TXD, 4:GND, > 5:GND, 6:RXD, 7:NC , 8:NC > - note : compatible with Cisco console cable > - HW Monitoring: nuvoTon NCT7802Y > - Power : 12 VDC, 2 A > - plug : Molex 5557-02R I couldn't find the Fortinet FortiGate 50E in the table of hardware. Would you like to add it? If not, should I add it based on your description? (I don't have one of these to hand to confirm details). https://openwrt.org/supported_devices/adding_to_toh
As for adding to ToH, I hadn't thought of anything yet. For me, it doesn't matter which one... I'll leave it up to you to decide :) BTW, adding entry to ToH should be done after the support is merged... Thanks, Hiroshi _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
