Hi Hauke,
thank you for your review.
On 2023/03/06 1:42, Hauke Mehrtens wrote:
On 3/1/23 17:01, INAGAKI Hiroshi wrote:
Fortinet FortiGate 50E (FG-50E) is a UTM, based on Armada 385 (88F6820).
....
Notes:
- All "SPEED" LEDs(Green/Amber) of LAN and 1000M "SPEED" LEDs(Green) of
WAN1/2 are connected to GPIO expander. There is no way to indicate
link speed of networking device, so those LEDs cannot be used like
stock firmware.
I think you can use the ledtrig-netdev to activate the LEDs on link up
if they are connected to the nxp,pca9555 GPIO extender.
I didn't think about it since "LINK/ACT" LEDs already indicate link up,
but it certainly might be a good alternative for "SPEED" LEDs.
- Both colors of Bi-color LEDs on the front panel cannot be turned on at
the same time.
- "PWR" and "Logo" LEDs are connected to power source directory.
- The following partitions are added for OpenWrt.
These partitions are contained in "uboot" partition (0x0-0x1fffff) on
stock firmware.
- "firmware-info"
- "dtb"
- "u-boot-env"
- "board-info"
.....
+define Device/fortinet_fg-50e
+ DEVICE_VENDOR := Fortinet
+ DEVICE_MODEL := FortiGate 50E
+ SOC := armada-385
+ KERNEL := kernel-bin | append-dtb
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | fortigate-header | \
+ gzip-filename FGT50E
+ KERNEL_SIZE := 6144k
+ DEVICE_DTS := armada-385-fortinet-fg-50e
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
+ sysupgrade-tar rootfs=$$$$@ | append-metadata
+ DEVICE_PACKAGES := kmod-hwmon-nct7802
Why don't you add the driver for the GPIO extender kmod-gpio-pca953x
here?
CONFIG_GPIO_PCA953X (and irq option) is enabled in mvebu/config-5.15[1],
so I didn't add that package.
[1]:
https://github.com/openwrt/openwrt/blob/a03076cc392b67c8342aac2017f8ac903c983e59/target/linux/mvebu/config-5.15#L191-L192
+endef
+TARGET_DEVICES += fortinet_fg-50e
+
define Device/globalscale_mirabox
$(Device/NAND-512K)
DEVICE_VENDOR := Globalscale
Regards,
Hiroshi
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
