#17328: Installed 14.07 RC2 m xw in a New Nanostation loco M5 and hangs after
one
ping
--------------------------+-----------------------------------
Reporter: anonymous | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone: Barrier Breaker 14.07
Component: base system | Version: Barrier Breaker 14.07
Resolution: | Keywords: m xw
--------------------------+-----------------------------------
Comment (by jb):
Replying to [comment:6 sven-ola]:
> Flashed your openwrt-ar71xx-generic-ubnt-loco-m-xw-squashfs-factory.bin.
Works. Results:
>
>
> {{{
> [sven-ola@pcmac Downloads]$ telnet 192.168.1.1
> Trying 192.168.1.1...
> Connected to 192.168.1.1.
> Escape character is '^]'.
> === IMPORTANT ============================
> Use 'passwd' to set your login password
> this will disable telnet and enable SSH
> ------------------------------------------
>
>
> BusyBox v1.22.1 (2014-08-14 15:19:11 CEST) built-in shell (ash)
> Enter 'help' for a list of built-in commands.
>
> _______ ________ __
> | |.-----.-----.-----.| | | |.----.| |_
> | - || _ | -__| || | | || _|| _|
> |_______|| __|_____|__|__||________||__| |____|
> |__| W I R E L E S S F R E E D O M
> -----------------------------------------------------
> CHAOS CALMER (Bleeding Edge, r42162)
> -----------------------------------------------------
> * 1 1/2 oz Gin Shake with a glassful
> * 1/4 oz Triple Sec of broken ice and pour
> * 3/4 oz Lime Juice unstrained into a goblet.
> * 1 1/2 oz Orange Juice
> * 1 tsp. Grenadine Syrup
> -----------------------------------------------------
> root@OpenWrt:/# brctl show
> bridge name bridge id STP enabled interfaces
> br-lan 7fff.0418d6270622 no eth0
> root@OpenWrt:/# ip l
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
master br-lan state UP mode DEFAULT group default qlen 1000
> link/ether 04:18:d6:27:06:22 brd ff:ff:ff:ff:ff:ff
> 3: sit0: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group
default
> link/sit 0.0.0.0 brd 0.0.0.0
> 4: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
> link/ether 04:18:d6:26:06:22 brd ff:ff:ff:ff:ff:ff
> 5: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP mode DEFAULT group default
> link/ether 04:18:d6:27:06:22 brd ff:ff:ff:ff:ff:ff
>
> }}}
Hello, I also confirm this lynxis build WORKS with New nanostation loco M5
(m xw)!
--
Ticket URL: <https://dev.openwrt.org/ticket/17328#comment:8>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
