#20409: uboot-lantiq: Arcadyan VGV7510KW22 brn-boot V1.08.01 does not work
--------------------------+----------------------------------
Reporter: cmoegele | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone: Chaos Calmer (trunk)
Component: base system | Version: Trunk
Resolution: | Keywords:
--------------------------+----------------------------------
Comment (by cmoegele):
Sorry to miss the important infos.
brn-uboot files were downloaded from wiki suggestions and selfbuild from
trunk CC ( 46713 )
Tried lots of combinations and uboot files, but no success.
[VR9 Boot]:m
RAM upload destination: (default:0x80002000) : 0x
Starting XModem download...(press Enter to abort)
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCdem download Done.
Do you want to uploaded code? (Y/n)
[VR9 Boot]:y
Go to Memory Address: (default:0x80002000) : 0x
Jump to address 0x
U-Boot 2013.10-openwrt4 (Jun 04 2015 - 13:08:30) VGV7510KW22
Board: Arcadyan VGV7510KW22
SoC: Lantiq VRX288 v1.2
CPU: 500 MHz
IO: 250 MHz
BUS: 250 MHz
BOOT: NOR
DRAM: 64 MiB
Flash: 16 MiB
Using default environment
In: serial
Out: serial
Err: serial
SPI: ready
Net: ltq-eth
Hit any key to stop autoboot: 2 1 0
Wrong Image Format for bootm command
ERROR: can't get kernel image!
VGV7510KW22 #
--
Ticket URL: <https://dev.openwrt.org/ticket/20409#comment:2>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
