#21526: WD Elements 4TB drive not detected properly
------------------------+--------------------------------
Reporter: anonymous | Owner: developers
Type: defect | Status: new
Priority: high | Milestone:
Component: packages | Version: Chaos Calmer 15.05
Resolution: | Keywords:
------------------------+--------------------------------
Comment (by anonymous):
I think 15 is high enough, but then I geht this:
{{{
[ 5405.380000] usb 1-1: new high-speed USB device number 8 using
ifxusb_hcd
[ 5405.576000] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 5405.588000] scsi host6: usb-storage 1-1:1.0
[ 5420.640000] scsi 6:0:0:0: Direct-Access WD Elements 107C
1065 PQ: 0 ANSI: 6
[ 5420.652000] sd 6:0:0:0: [sda] 976746240 4096-byte logical blocks: (4.00
TB/3.63 TiB)
[ 5420.832000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5421.204000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5421.576000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5421.948000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5422.324000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5422.704000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5422.904000] sd 6:0:0:0: [sda] Write Protect is off
[ 5422.908000] sd 6:0:0:0: [sda] Mode Sense: 53 00 10 08
[ 5423.088000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5423.464000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5423.852000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5424.224000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5424.600000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5424.980000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5425.172000] sd 6:0:0:0: [sda] No Caching mode page found
[ 5425.176000] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 5425.360000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5425.732000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5426.120000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5426.492000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5426.864000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5427.236000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5427.604000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5427.976000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5428.348000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5428.728000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5429.104000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5429.480000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5429.848000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5430.224000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5430.608000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5430.984000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5431.356000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5431.732000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5432.096000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5432.472000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5432.848000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5433.224000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5433.608000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5433.980000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5434.176000] sd 6:0:0:0: [sda] READ CAPACITY failed
[ 5434.180000] sd 6:0:0:0: [sda]
[ 5434.184000] Result: hostbyte=0x07 driverbyte=0x00
[ 5434.188000] sd 6:0:0:0: [sda] Sense not available.
[ 5434.372000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5434.744000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5435.116000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5435.488000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5435.860000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5436.232000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5436.596000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5436.968000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5437.340000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5437.712000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5438.088000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5438.460000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5438.656000] sda: detected capacity change from 4000752599040 to 0
[ 5438.860000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5439.344000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5439.716000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5440.088000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5440.460000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5440.832000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5441.196000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5441.568000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5441.940000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5442.312000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5442.684000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5443.056000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5443.428000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5443.800000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5444.172000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5444.544000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5444.920000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5445.292000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5445.656000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5446.028000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5446.400000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5446.772000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5447.148000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5447.520000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5447.884000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5448.256000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5448.628000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5449.004000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5449.376000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5449.748000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5450.112000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5450.484000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5450.856000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5451.232000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5451.604000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5451.976000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5452.168000] sd 6:0:0:0: [sda] READ CAPACITY failed
[ 5452.172000] sd 6:0:0:0: [sda]
[ 5452.176000] Result: hostbyte=0x07 driverbyte=0x00
[ 5452.180000] sd 6:0:0:0: [sda] Sense not available.
[ 5452.356000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5452.728000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5453.104000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5453.476000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5453.848000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5454.220000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5454.584000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5454.956000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5455.328000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5455.700000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5456.072000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5456.448000] usb 1-1: reset high-speed USB device number 8 using
ifxusb_hcd
[ 5456.640000] sd 6:0:0:0: [sda] Attached SCSI disk
}}}
Why are there so many resets? And why is after some time a change of the
capacity from 4TB to 0?
--
Ticket URL: <https://dev.openwrt.org/ticket/21526#comment:8>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
