Hi, my device (Linksys WRT54GL) does not work reliable with OpenWRT/Kamikaze and I see strange stuff in dmesg.
Maybe someone can tell my what I might be doing wrong (or if it is just my hardware dying ...) dmesg after running some minutes comes here: ,---- | Linux version 2.6.22 ([EMAIL PROTECTED]) (gcc version 4.1.2) #2 Sun Sep 30 20:38:47 CEST 2007 | CPU revision is: 00029008 | ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0E, vendor 0x4243) | ssb: Core 1 found: Fast Ethernet (cc 0x806, rev 0x09, vendor 0x4243) | ssb: Core 2 found: MIPS 3302 (cc 0x816, rev 0x06, vendor 0x4243) | ssb: Core 3 found: USB 1.1 Host (cc 0x817, rev 0x02, vendor 0x4243) | ssb: Core 4 found: MEMC SDRAM (cc 0x80F, rev 0x01, vendor 0x4243) | ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) | ssb: Core 6 found: Roboswitch (cc 0x81C, rev 0x02, vendor 0x4243) | ssb: Initializing MIPS core... | ssb: set_irq: core 0x0806, irq 2 => 2 | ssb: set_irq: core 0x0817, irq 4 => 3 | ssb: set_irq: core 0x0812, irq 0 => 4 | ssb: Sonics Silicon Backplane found at address 0x18000000 | Determined physical RAM map: | memory: 01000000 @ 00000000 (usable) | Initrd not found or empty - disabling initrd | On node 0 totalpages: 4096 | Normal zone: 32 pages used for memmap | Normal zone: 0 pages reserved | Normal zone: 4064 pages, LIFO batch:0 | Built 1 zonelists. Total pages: 4064 | Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200 | Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes. | Primary data cache 8kB, 2-way, linesize 16 bytes. | Synthesized TLB refill handler (20 instructions). | Synthesized TLB load handler fastpath (32 instructions). | Synthesized TLB store handler fastpath (31 instructions). | Synthesized TLB modify handler fastpath (30 instructions). | PID hash table entries: 64 (order: 6, 256 bytes) | Using 100.000 MHz high precision timer. | Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) | Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) | Memory: 13628k/16384k available (2030k kernel code, 2756k reserved, 297k data, 120k init, 0k highmem) | Calibrating delay loop... 199.16 BogoMIPS (lpj=398336) | Mount-cache hash table entries: 512 | NET: Registered protocol family 16 | Time: MIPS clocksource has been installed. | NET: Registered protocol family 2 | IP route cache hash table entries: 1024 (order: 0, 4096 bytes) | TCP established hash table entries: 512 (order: 0, 4096 bytes) | TCP bind hash table entries: 512 (order: -1, 2048 bytes) | TCP: Hash tables configured (established 512 bind 512) | TCP reno registered | squashfs: version 3.0 (2006/03/15) Phillip Lougher | Registering mini_fo version $Id$ | JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. | io scheduler noop registered | io scheduler deadline registered (default) | Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled | serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A | serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A | b44.c:v1.01 (Jun 16, 2006) | eth0: Broadcom 10/100BaseT Ethernet 00:16:b6:39:92:9a | flash init: 0x1c000000 0x02000000 | Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank | Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 | Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 | Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 | Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 | Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 | Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 | Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 | Intel/Sharp Extended Query Table at 0x0035 | cfi_cmdset_0001: Erase suspend on write enabled | erase region 0: offset=0x0,size=0x2000,blocks=8 | erase region 1: offset=0x10000,size=0x10000,blocks=63 | Flash device: 0x400000 at 0x1fc00000 | bootloader size: 262144 | Creating 4 MTD partitions on "Physically mapped flash": | 0x00000000-0x00040000 : "cfe" | 0x00040000-0x003f0000 : "linux" | 0x000f8000-0x003f0000 : "rootfs" | mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only | 0x00200000-0x003f0000 : "rootfs_data" | 0x003f0000-0x00400000 : "nvram" | nf_conntrack version 0.5.0 (128 buckets, 1024 max) | ip_tables: (C) 2000-2006 Netfilter Core Team | TCP vegas registered | NET: Registered protocol family 1 | NET: Registered protocol family 17 | 802.1Q VLAN Support v1.8 Ben Greear <[EMAIL PROTECTED]> | All bugs added by David S. Miller <[EMAIL PROTECTED]> | VFS: Mounted root (squashfs filesystem) readonly. | Freeing unused kernel memory: 120k freed | Warning: unable to open an initial console. | Algorithmics/MIPS FPU Emulator v1.5 | diag: Detected 'Linksys WRT54G/GS/GL' | b44: eth0: Link is up at 100 Mbps, full duplex. | b44: eth0: Flow control is off for TX and off for RX. | Probing device eth0: found! | jffs2_scan_eraseblock(): Node at 0x00060fc8 {0x1985, 0xe000, 0x00000023) has invalid CRC 0x25000480 (calculated 0x73ce95ac) | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060fcc: 0x0023 instead | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060fd0: 0x0480 instead | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060fd4: 0x0001 instead | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060fd8: 0x000e instead | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060fe4: 0x020b instead | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060fe8: 0x0002 instead | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060fec: 0x5240 instead | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060ff0: 0x4848 instead | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060ff4: 0x0054 instead | Further such events for this erase block will not be printed | jffs2_scan_eraseblock(): Node at 0x0009270c {0x1985, 0xe000, 0x0000002c) has invalid CRC 0x00402424 (calculated 0x2bad85fa) | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00092710: 0x002c instead | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00092714: 0x2424 instead | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00092720: 0x0024 instead | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0009272c: 0x6810 instead | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00092730: 0x0050 instead | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00092734: 0x6860 instead | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00092738: 0x4000 instead | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0009273c: 0x0020 instead | jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00092744: 0x0006 instead | Further such events for this erase block will not be printed | mini_fo: using base directory: / | mini_fo: using storage directory: /jffs | b44: eth0: Link is up at 100 Mbps, full duplex. | b44: eth0: Flow control is off for TX and off for RX. | BFL_ENETADM not set in boardflags. Use force=1 to ignore. | PPP generic driver version 2.4.2 | wlan: 0.8.4.2 (svn r2568) | device eth0.0 entered promiscuous mode | eth0.0: dev_set_promiscuity(master, 1) | device eth0 entered promiscuous mode | eth0.0: add 01:00:5e:00:00:01 mcast address to master interface | br-lan: port 1(eth0.0) entering learning state | br-lan: topology change detected, propagating | br-lan: port 1(eth0.0) entering forwarding state | ath_hal: module license 'Proprietary' taints kernel. | ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, REGOPS_FUNC) | ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (svn r2568) | ath_rate_minstrel: look around rate set to 10% | ath_rate_minstrel: EWMA rolloff level set to 75% | ath_rate_minstrel: max segment size in the mrr set to 6000 us | wlan: mac acl policy registered | ath_pci: 0.9.4.5 (svn r2568) | eth0.1: add 01:00:5e:00:00:01 mcast address to master interface | argh. node added in wrong place | argh. node added in wrong place | Kernel bug detected[#1]: | Cpu 0 | $ 0 : 00000000 10009800 00000001 00000000 | $ 4 : 80e17c00 8039f09c 000306ee 000000f0 | $ 8 : 00010000 000306ee 8039f09c 000000f0 | $12 : 80e89500 001f0000 8031dde8 80f10080 | $16 : 8039f09c 8039f09c 80f10080 80e17c00 | $20 : 000000f0 80e89500 00000000 80e89500 | $24 : 00000000 80145f84 | $28 : 8031c000 8031dd60 80afcc40 800d5100 | Hi : 000006ee | Lo : 00000003 | epc : 800d3408 Tainted: P | ra : 800d5100 Status: 10009803 KERNEL EXL IE | Cause : 00000034 | PrId : 00029008 | Modules linked in: ath_pci wlan_xauth wlan_wep wlan_tkip wlan_ccmp wlan_acl ath_rate_minstrel ath_hal(P) wlan_scan_sta wlan_scan_ap wlan ppp | _async ppp_generic slhc crc_ccitt switch_robo switch_core diag | Process jffs2_gcd_mtd3 (pid: 186, threadinfo=8031c000, task=802d6000) | Stack : 0000000c c0011985 00000007 4af89ed4 000306ec fffffffb 80f10080 000000f0 | 8039f09c 80e17c00 80f10080 000000f0 80e17c00 80e7d474 800d5100 80139c20 | 000000f0 ffffffaf 000000f0 8031dde8 80e89500 8031dde8 000306ec 00000000 | 80f10080 800db628 00000000 8001c418 00007ddc e0011985 000000f0 8031dde8 | 80f10080 00000000 000000f0 0000d4a4 80f70790 80e23224 804f3710 804f17e8 | ... | Call Trace:[<800d5100>][<80139c20>][<800db628>][<8001c418>][<800dbc60>][<800dc9b4>][<800e0088>][<800d4d54>][<800e08a0>][<8008c6b4>][<8008c90 | 4>][<800dfa94>][<800dd484>][<800306cc>][<80030618>][<800de9b4>][<800de918>][<800039d0>][<800de890>][<800057c8>][<800057b8>] | | Code: 00e0a021 8fb50050 2c620001 <00028036> 8cb0002c 2463ffff 2405fffe 2404ffff 08034d0e | CPU 0 Unable to handle kernel paging request at virtual address 00000008, epc == 8002e034, ra == 8002f4d8 | Oops[#2]: | Cpu 0 | $ 0 : 00000000 10009800 00000000 00000000 | $ 4 : 802d6000 00000001 00000000 802d6000 | $ 8 : 00000000 00020000 00000000 80236000 | $12 : 80848ef0 00080000 00000001 80848224 | $16 : 00000001 00000001 802d6000 8023cc00 | $20 : 00000000 00000000 00000000 00000000 | $24 : 00000000 00200200 | $28 : 8030e000 8030fea0 00000000 8002f4d8 | Hi : 00000000 | Lo : 00020000 | epc : 8002e034 Tainted: P | ra : 8002f4d8 Status: 10009802 KERNEL EXL | Cause : 00000008 | BadVA : 00000008 | PrId : 00029008 | Modules linked in: ath_pci wlan_xauth wlan_wep wlan_tkip wlan_ccmp wlan_acl ath_rate_minstrel ath_hal(P) wlan_scan_sta wlan_scan_ap wlan ppp | _async ppp_generic slhc crc_ccitt switch_robo switch_core diag | Process pdflush (pid: 32, threadinfo=8030e000, task=802fa000) | Stack : 80f0b478 803b4000 8023cc10 8030ff28 10009801 80e17a40 80240000 8002f5c0 | 00000000 00000000 00000000 00000000 80e17c00 800dec60 8030ff28 8023cc00 | 803b4800 803b4840 80e17a00 800770e0 00000000 802fa000 10009801 00000000 | 8030ff84 80240000 80053a20 80053b10 0001a01c 00000002 34324900 003d08ba | fffeeff2 00000127 00000000 00000000 8030ff20 00000000 00000000 00000000 | ... | Call Trace:[<8002f5c0>][<800dec60>][<800770e0>][<80053a20>][<80053b10>][<800547d0>][<8005476c>][<801f8da4>][<800539e8>][<80054690>][<8003a50 | 8>][<8003a4e8>][<800057c8>][<800057b8>] | | Code: 00001821 8c820338 01021021 <8c440008> 24020001 10820008 24030001 14800005 28a50020 | WARNING: at kernel/exit.c:869 do_exit() | Call Trace:[<80009a90>][<80009a90>][<80026538>][<800099d4>][<80009a3c>][<8000d9ac>][<8000d958>][<8002e034>][<8002f4d8>][<8001dd90>][<80144f0 | 4>][<80003960>][<8002f38c>][<8002f4d8>][<8002e034>][<8002f5c0>][<800dec60>][<800770e0>][<80053a20>][<80053b10>][<800547d0>][<8005476c>][<801 | f8da4>][<800539e8>][<80054690>][<8003a508>][<8003a4e8>][<800057c8>][<800057b8>] | Call Trace:[<800d5100>][<80139c20>][<800db628>][<8001c418>][<800dbc60>][<800dc9b4>][<800e0088>][<800d4d54>][<800e08a0>][<8008c6b4>][<8008c90 | 4>][<800dfa94>][<800dd484>][<800306cc>][<80030618>][<800de9b4>][<800de918>][<800039d0>][<800de890>][<800057c8>][<800057b8>] | | Code: 00e0a021 8fb50050 2c620001 <00028036> 8cb0002c 2463ffff 2405fffe 2404ffff 08034d0e | CPU 0 Unable to handle kernel paging request at virtual address 00000008, epc == 8002e034, ra == 8002f4d8 | Oops[#2]: | Cpu 0 | $ 0 : 00000000 10009800 00000000 00000000 | $ 4 : 802d6000 00000001 00000000 802d6000 | $ 8 : 00000000 00020000 00000000 80236000 | $12 : 80848ef0 00080000 00000001 80848224 | $16 : 00000001 00000001 802d6000 8023cc00 | $20 : 00000000 00000000 00000000 00000000 | $24 : 00000000 00200200 | $28 : 8030e000 8030fea0 00000000 8002f4d8 | Hi : 00000000 | Lo : 00020000 | epc : 8002e034 Tainted: P | ra : 8002f4d8 Status: 10009802 KERNEL EXL | Cause : 00000008 | BadVA : 00000008 | PrId : 00029008 | Modules linked in: ath_pci wlan_xauth wlan_wep wlan_tkip wlan_ccmp wlan_acl ath_rate_minstrel ath_hal(P) wlan_scan_sta wlan_scan_ap wlan ppp | _async ppp_generic slhc crc_ccitt switch_robo switch_core diag | Process pdflush (pid: 32, threadinfo=8030e000, task=802fa000) | Stack : 80f0b478 803b4000 8023cc10 8030ff28 10009801 80e17a40 80240000 8002f5c0 | 00000000 00000000 00000000 00000000 80e17c00 800dec60 8030ff28 8023cc00 | 803b4800 803b4840 80e17a00 800770e0 00000000 802fa000 10009801 00000000 | 8030ff84 80240000 80053a20 80053b10 0001a01c 00000002 34324900 003d08ba | fffeeff2 00000127 00000000 00000000 8030ff20 00000000 00000000 00000000 | ... | Call Trace:[<8002f5c0>][<800dec60>][<800770e0>][<80053a20>][<80053b10>][<800547d0>][<8005476c>][<801f8da4>][<800539e8>][<80054690>][<8003a50 | 8>][<8003a4e8>][<800057c8>][<800057b8>] | | Code: 00001821 8c820338 01021021 <8c440008> 24020001 10820008 24030001 14800005 28a50020 | WARNING: at kernel/exit.c:869 do_exit() | Call Trace:[<80009a90>][<80009a90>][<80026538>][<800099d4>][<80009a3c>][<8000d9ac>][<8000d958>][<8002e034>][<8002f4d8>][<8001dd90>][<80144f0 | 4>][<80003960>][<8002f38c>][<8002f4d8>][<8002e034>][<8002f5c0>][<800dec60>][<800770e0>][<80053a20>][<80053b10>][<800547d0>][<8005476c>][<801 | f8da4>][<800539e8>][<80054690>][<8003a508>][<8003a4e8>][<800057c8>][<800057b8>] `---- Thanks for any useful hints ... Sebastian _______________________________________________ openwrt-users mailing list openwrt-users@lists.openwrt.org http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users