[I posted this to the forum, but I loathe forums and I later discovered there are mailing lists]
Hello, This is the model of the router supplied by my isp (ya.com) in spain for double play (adsl+voip, replacing analog voice), so the model number probably means nothing. It's made by arcadyan, it has an adsl port, a 4 port ethernet switch, g wireless and 2 FXS ports. I opened it and took some photos, unfortunately the main chip is covered with a glued-in heatsink. back side of the board http://img512.imageshack.us/my.php?image=dscn1845rl6.jpg main side of the board http://img443.imageshack.us/my.php?image=dscn1846ix5.jpg detail of the wireless chip http://img443.imageshack.us/my.php?image=dscn1847rp1.jpg The wireless chip is an atheros 2417 (3rd photo), the switch is a realtek (2nd photo) and there's not much else there. I suppose it's a danube because the firmware file (that I cannot decipher) it's called "ya.com-FW-1.00.001(danube-AnnexA-ISDNx-FXOx-USB).bin", and there are references to DANUBE inside (e.g. there's an embedded zip file with a "DANUBE_2.1.2.15.0.1.bin" file). On the second photo you can see a J2 header that's probably a serial port. Do you think it's really based on the danube chipset? If so it should be possible to run openwrt on it, though I won't have the possibility to experiment too much since the device will be providing my main phone line (through its FXS ports). Bye -- Luca _______________________________________________ openwrt-users mailing list [email protected] http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
