based on a config file provided by michael buesch yesterday, i updated my svn working copy to trunk, configured and successfully built an openwrt-brcm47xx-squashfs.trx image, then followed the instructions here:
http://wiki.openwrt.org/OpenWrtDocs/Hardware/Asus/WL500GPV2 as in: 1) put the router in diagnostic mode 2) manually configured my laptop to have IP 192.168.1.2 3) tftp'ed to the router (192.168.1.1) 4) set tftp options trace, verbose, binary 5) "put" the trx image, which generated the expected page after page of packets and ACKs to and from the router 6) let the router sit for several minutes after which i power-cycled and ... nothing. can't ping, can't telnet, can't browse. if anyone else has flashed that model of router, can you see anything i did obviously wrong? thanks. rday p.s. just to make sure, i put it back in diag mode and went through all the steps again, with the same result. p.p.s. i skipped most of the steps on that web page since most of it had to do with getting around issues with earlier kernels. i simply built my image in one pass, and tried to flash. ======================================================================== Robert P. J. Day Linux Consulting, Training and Annoying Kernel Pedantry: Have classroom, will lecture. http://crashcourse.ca Waterloo, Ontario, CANADA ======================================================================== _______________________________________________ openwrt-users mailing list [email protected] http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
