Hi All,
I am not able to boot the openwrt kernel on BeagleBoard xM. I have
downloaded the source code from the backfire trunk and using linux kernl
2.6.32.29 for omap35xx devices.
Following message is displayed,
OMAP3 beagleboard.org # mmc init
mmc1 is available
OMAP3 beagleboard.org # fatload mmc 0 0x80200000
openwrt-omap35xx-2.6-uImage reading openwrt-omap35xx-2.6-uImage
1336852 bytes read
OMAP3 beagleboard.org # setenv bootargs 'console=ttyS2,115200n8
init=/init root=/dev/mmcblk0p2 rootfstype=ext4 rw rootdelay=1 nohz=off'
OMAP3 beagleboard.org # bootm 0x80200000
## Booting kernel from Legacy Image at 80200000 ...
Image Name: OpenWRT Kernel Image gumstix
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1336788 Bytes = 1.3 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Thanks in Advance,
Aviraj
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-users
