On Friday, October 12, 2012 at 11:09:21 PM "HeXiLeD" <[email protected]> wrote: > The question is; should i use the dlink 601 A1 profile or 600 A1 > profile > will work without any issues since it seems to be the latest image > available from the repos ? I have a 601-A1 and from what I understand, the initial "Factory" image is slightly different, but after that, the images are the same. I am using the 4 Sep squashfs "sysupgrade" image [1] for the 601 and it has been very solid so far.
> while it says we can use either the jffs2 or squashFS versions it > also says that jffs2 does NOT seem to work on the DIR-601 so in other > words how can we use either ? I havent tried jffs on my 601 so I couldn't say if it works or not. It has a fairly robust emergency boot system, so it should be hard to brick even if jffs doesn't work as expected. > Can anyone clarify this or point at which profile and file system the > 601 A1 should use ? I know that using the 601 image [1], it shows my hardware as being a 600. Not sure if this is expected or not, but there is a ticket open on the subject [2] Thanks Aaron Z [1] http://downloads.openwrt.org/attitude_adjustment/12.09-beta/ar71xx/generic/openwrt-ar71xx-generic-dir-601-a1-squashfs-sysupgrade.bin [2] https://dev.openwrt.org/ticket/12156 _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-users
