On 02/10/2013 01:10 PM, Jean Baptiste Favre (Openwrt-users) wrote: > Hello, > I set up a Netgear WNR3500 router with OpenWRT, based on trunk. > Wifi interface (wlan0), using b43 drivers, is bridged to LAN switch > (eth0.0) as follow (default configuration): > > # brctl show > bridge name bridge id STP enabled interfaces > br-lan 8000.c03f0ebec43c no eth0.0 > wlan0 > > Wireless connection is configured in AP mode. > > My problem is that Wifi connected clients can't ping or reach LAN > connected servers. > > My understanding is that OpenWRT does not relay/forward ARP packets from > Wifi to LAN. > If I add a static route on LAN server, client will be able to reach it. > > According to > http://wiki.openwrt.org/doc/uci/network#relay.between.lan.and.wireless.station > I need to use relayd to imitate Broadcom bridged client behaviour. > Problem here is that I need to use separated subnets, which prevent > using same IP address to devices. > > Question is, is there any other solution to get it working ? > > Regards, > Jean Baptiste
The problem you are describing should be fixed in r35507. Hauke _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-users
