Le 10/02/2013 13:22, Hauke Mehrtens a écrit : > On 02/10/2013 01:10 PM, Jean Baptiste Favre (Openwrt-users) wrote: >> Hello, >> I set up a Netgear WNR3500 router with OpenWRT, based on trunk. >> Wifi interface (wlan0), using b43 drivers, is bridged to LAN switch >> (eth0.0) as follow (default configuration): >> >> # brctl show >> bridge name bridge id STP enabled interfaces >> br-lan 8000.c03f0ebec43c no eth0.0 >> wlan0 >> >> Wireless connection is configured in AP mode. >> >> My problem is that Wifi connected clients can't ping or reach LAN >> connected servers. >> >> My understanding is that OpenWRT does not relay/forward ARP packets from >> Wifi to LAN. >> If I add a static route on LAN server, client will be able to reach it. >> >> According to >> http://wiki.openwrt.org/doc/uci/network#relay.between.lan.and.wireless.station >> I need to use relayd to imitate Broadcom bridged client behaviour. >> Problem here is that I need to use separated subnets, which prevent >> using same IP address to devices. >> >> Question is, is there any other solution to get it working ? >> >> Regards, >> Jean Baptiste > > The problem you are describing should be fixed in r35507. > > Hauke
Oh, great ! I'll try this asap. Thanks, Jean Baptiste _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-users
