Hi again!
I'm trying to configure OpenWRT to dynamically assign the VLAN to every
connected WLAN device based on the answer of a Radius server.
I followed this HowTo:
http://www.radiusdesk.com/technical_discussions/dynamicvlan
I see in the System log:
Tue Mar 31 18:49:29 2015 daemon.notice netifd: Network device 'wlan0' link is up
Tue Mar 31 18:49:29 2015 daemon.info hostapd: wlan0: STA 30:85:a9:55:ba:f9 IEEE
802.11: authenticated
Tue Mar 31 18:49:29 2015 daemon.info hostapd: wlan0: STA 30:85:a9:55:ba:f9 IEEE
802.11: associated (aid 1)
Tue Mar 31 18:49:29 2015 daemon.info hostapd: wlan0: STA 30:85:a9:55:ba:f9
RADIUS: VLAN ID 10
Tue Mar 31 18:49:29 2015 kern.info kernel: [ 615.490000] device wlan0.10
entered promiscuous mode
Tue Mar 31 18:49:29 2015 kern.info kernel: [ 615.490000] breth0.10: port
1(wlan0.10) entered forwarding state
Tue Mar 31 18:49:29 2015 kern.info kernel: [ 615.500000] breth0.10: port
1(wlan0.10) entered forwarding state
Tue Mar 31 18:49:29 2015 kern.info kernel: [ 615.510000] breth0.10: port
1(wlan0.10) entered forwarding state
Tue Mar 31 18:49:30 2015 daemon.info hostapd: wlan0: STA 30:85:a9:55:ba:f9 WPA:
pairwise key handshake completed (RSN)
Tue Mar 31 18:49:30 2015 daemon.info hostapd: wlan0: STA 30:85:a9:55:ba:f9
RADIUS: starting accounting session 551AD018-00000000
Tue Mar 31 18:49:30 2015 daemon.info hostapd: wlan0: STA 30:85:a9:55:ba:f9 IEEE
802.1X: authenticated - EAP type: 25 (PEAP)
But if I try to reach the device from another device in VLAN 10 I can't...
I'm using OpenWRT Barrier Breaker 14.07 / LuCI Trunk (0.12+svn-r10530) on a
TP-Link TL-WR1043N/ND v1.
Could someone help me?
Thanks
Luca Bertoncello
([email protected])
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
