alessandro macuz <[email protected]> schrieb: > What do "ifconfig -a" and "brctl show" give you?
I just see this: root@OpenWrt:/etc/config# tcpdump -i wlan0.10 tcpdump: WARNING: wlan0.10: no IPv4 address assigned tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on wlan0.10, link-type EN10MB (Ethernet), capture size 65535 bytes 20:02:20.452294 ARP, Request who-has frodo.lucabert.intra tell 192.168.10.154, length 28 20:02:20.452366 ARP, Request who-has frodo.lucabert.intra tell 192.168.10.154, length 28 20:02:21.453060 ARP, Request who-has frodo.lucabert.intra tell 192.168.10.154, length 28 20:02:21.453128 ARP, Request who-has frodo.lucabert.intra tell 192.168.10.154, length 28 20:02:22.451956 ARP, Request who-has frodo.lucabert.intra tell 192.168.10.154, length 28 20:02:22.452024 ARP, Request who-has frodo.lucabert.intra tell 192.168.10.154, length 28 the same if I try to sniff eth0.10... It seems that the bridge does not work, isn't it? Thanks Luca Bertoncello ([email protected]) _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
