In order to use IPv6, you must have an address starting 2000-3fff (globally routable IPv6 address). The fe80 address can be used as the default gateway, but your outgoing packets must contain a source address with a globally unique address, which I don't see here. Turn on your dhcp v6 client so you pick up a globally routable address (your ISP should be broadcasting).
David A. Bandel On Fri, Oct 9, 2015 at 3:50 PM, Emmanuel Blot <[email protected]> wrote: > Hi, > > I'm desperately trying to set up an IPv6 link to my ISP. This ISP > provides native IPv6 along with IPv4. > > I tried to follow IPv6 native tutorial > (http://wiki.openwrt.org/doc/uci/network6) > > So far, pppd daemon shows that IPV6 link addresses are negociated: > > Fri Oct 9 21:57:12 2015 daemon.debug pppd[1891]: sent [IPV6CP > ConfReq id=0x1 <addr fe80::7840:507d:15d5:2f8b>] > Fri Oct 9 21:57:12 2015 daemon.debug pppd[1891]: rcvd [IPV6CP > ConfReq id=0xb4 <addr fe80::0230:88ff:fe04:63d4>] > Fri Oct 9 21:57:12 2015 daemon.debug pppd[1891]: sent [IPV6CP > ConfAck id=0xb4 <addr fe80::0230:88ff:fe04:63d4>] > Fri Oct 9 21:57:12 2015 daemon.debug pppd[1891]: rcvd [IPV6CP > ConfAck id=0x1 <addr fe80::7840:507d:15d5:2f8b>] > > I can ping the local address: > > root@gateway:~# ping -6 fe80::7840:507d:15d5:2f8b > PING fe80::7840:507d:15d5:2f8b (fe80::7840:507d:15d5:2f8b): 56 data bytes > 64 bytes from fe80::7840:507d:15d5:2f8b: seq=0 ttl=64 time=0.858 ms > 64 bytes from fe80::7840:507d:15d5:2f8b: seq=1 ttl=64 time=0.612 ms > > I cannot ping the remote address if I does not specify the interface: > > root@gateway:~# ping -6 fe80::0230:88ff:fe04:63d4 > PING fe80::0230:88ff:fe04:63d4 (fe80::230:88ff:fe04:63d4): 56 data bytes > ^C > --- fe80::0230:88ff:fe04:63d4 ping statistics --- > 6 packets transmitted, 0 packets received, 100% packet loss > > However, if I specify the interface: > > root@gateway:~# ping -6 -I pppoe-wan fe80::0230:88ff:fe04:63d4 > PING fe80::0230:88ff:fe04:63d4 (fe80::230:88ff:fe04:63d4): 56 data bytes > 64 bytes from fe80::230:88ff:fe04:63d4: seq=0 ttl=255 time=43.002 ms > 64 bytes from fe80::230:88ff:fe04:63d4: seq=1 ttl=255 time=60.694 ms > > ping is successful, then pinging again w/o the interface does work > > root@gateway:~# ping -6 fe80::0230:88ff:fe04:63d4 > PING fe80::0230:88ff:fe04:63d4 (fe80::230:88ff:fe04:63d4): 56 data bytes > 64 bytes from fe80::230:88ff:fe04:63d4: seq=0 ttl=255 time=43.083 ms > 64 bytes from fe80::230:88ff:fe04:63d4: seq=1 ttl=255 time=43.194 ms > > I'm not sure why the router does not seem to know how to reach the > remote host, as the address has been negociated with pppd... > > Moreover, whereas 'wan' interface seems ok: > > root@gateway:~# ifstatus wan > { > "up": true, > "pending": false, > "available": true, > "autostart": true, > "uptime": 2784, > "l3_device": "pppoe-wan", > "proto": "pppoe", > "device": "nas0", > "updated": [ > "addresses", > "routes" > ], > "metric": 0, > "delegation": false, > "ipv4-address": [ > { > "address": "109.190.73.171", > "mask": 32 > } > ], > "ipv6-address": [ > { > "address": "fe80::7840:507d:15d5:2f8b", > "mask": 128 > } > ], > "ipv6-prefix": [ > ], > "ipv6-prefix-assignment": [ > ], > "route": [ > { > "target": "0.0.0.0", > "mask": 0, > "nexthop": "178.32.37.14", > "source": "0.0.0.0\/0" > } > ], > "dns-server": [ > "91.121.61.147", > "87.98.149.171" > ], > "dns-search": [ > ], > "inactive": { > "ipv4-address": [ > ], > "ipv6-address": [ > ], > "route": [ > ], > "dns-server": [ > ], > "dns-search": [ > ] > }, > "data": { > } > } > > 'wan6' interface seems always down: > > root@gateway:~# ifstatus wan6 > { > "up": false, > "pending": true, > "available": true, > "autostart": true, > "proto": "dhcpv6", > "device": "nas0", > "data": { > } > } > > I've not been able to find how to debug this issue, any pointer would be > great. > > Thanks, > Manu > > root@gateway:~# uname -a > Linux gateway 3.18.20 #1 Fri Sep 4 17:16:20 CEST 2015 mips GNU/Linux > > root@gateway:~# cat /etc/openwrt_release > DISTRIB_ID='OpenWrt' > DISTRIB_RELEASE='15.05' > DISTRIB_REVISION='r46767' > DISTRIB_CODENAME='chaos_calmer' > DISTRIB_TARGET='lantiq/xway' > DISTRIB_DESCRIPTION='OpenWrt Chaos Calmer 15.05' > DISTRIB_TAINTS='' > > Device: Buffalo WBMR-HP-G300H (ADSL Annex A) > _______________________________________________ > openwrt-users mailing list > [email protected] > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users > -- Two things are infinite: the universe and human stupidity; and I'm not sure about the the universe. -- Albert Einstein Visit my web page at: http://david.bandel.us/
_______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
