post here cat /etc/config/network cat /etc/config/wireless
Saverio 2015-10-23 18:19 GMT+02:00 Nemesis <[email protected]>: > Hi everybody, > > I'm trying to understand how WDS works with 2 TP-Link WDR4300. > > Is this wiki page still relevant? > http://wiki.openwrt.org/doc/recipes/atheroswds > > I have successfully connected the two routers via wifi, I see confirmation > of this in the AP both via the luci interface and via ifconfig (because I > see "wlan0.sta1"). > > The problem is that the client doesn't et an IP address from the DHCP server > running on the AP, so I cannot reach the internet nor any other host in the > network. > > I also do not understand how to debug, what commands and tools should I use > to understand what I'm doing wrong? > > the situation on the client router is as follows: > > the arp table is empty; > the routing table is empty; > bridge is brought up correctly between eth0.1 and wlan0 (wds client) but no > DHCP lease is obtained from the AP > > Any other link to read and study? > > Thanks > Federico > > > _______________________________________________ > openwrt-users mailing list > [email protected] > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users > _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
