Hello all....
I have read AR9331 data sheet and found several facts like Tx can one
spatial data stream and Rx can two spatial streams for 802.11n. So I
configure wireless radio like below :
config wifi-device 'radio0'
option type 'mac80211'
option channel '11'
option hwmode '11n'
option htmode 'HT40-'
list ht_capab 'SHORT-GI-20'
list ht_capab 'SHORT-GI-40'
list ht_capab 'TX-STBC1'
list ht_capab 'RX-STBC12'
list ht_capab 'DSSS_CCK-40'
option txpower '15'
option country 'US'
But when I excute 'iw list' there is no TX-STBC1 but in data sheet show TX
can send one spatial stream and RX can receive 2 spatial stream so I write
TX-STBC1 and RX-STBC12 adjust with hostapd.conf for options at ht_capab.
am I wrong ? or there is opinion/advice for this case ?
Sincerely
Riyadi
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
