I have installed a self-compiled Chaos Calmer on a Mikrotik RB951g-2hnd.
It is intended to be used as a openvpn-client for home-work, to be
placed behind the normal home-network.
If there is a cable in the wan-port, it takes about 7minutes 30 seconds,
from power on to it tell, it has booted with a beep.
Without a cable in the wan-port it only takes 8 seconds until the same beep.
If I put the cable in the wan port after it has booted, it takes just 8
seconds until wan-connecction is up, and a client can ping through the
router.
Wan is normally configured with dhcp, but it does not make a faster
boot, if wan is a static address.
I have not found anything in the logs, that has given me a clue to, what
is taking all that time (but that might be me not understandig the log.
An suggestions on, what to do ?
--
Morten Christensen
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
