I meant to say, Red Hat packages do *not* have MPI support :-) ________________________________ Fra: Opm <opm-boun...@opm-project.org> på vegne av Alf Birger Rustad <a...@statoil.com> Sendt: 15. april 2018 22:53:02 Til: Atgeirr Rasmussen; opm@opm-project.org Emne: Re: [Opm] (no subject)
Please note that the Red Hat packages do have MPI support. You will need to compile from source, and to get load balancing, you will need to also compile and link in zoltan. Cheers, Alf ________________________________ Fra: Opm <opm-boun...@opm-project.org> på vegne av Atgeirr Rasmussen <atgeirr.rasmus...@sintef.no> Sendt: 15. april 2018 21:39 Til: opm@opm-project.org Emne: Re: [Opm] (no subject) Dear Abdelmoumen, Installing and running the RHEL binary packages could work, but there could be things that make your HPC system different from a standard RHEL system, causing incompatibilities. You could try, and report how it goes? Atgeirr ________________________________ Frå: Opm <opm-boun...@opm-project.org> på vegne av bacetti abdelmoumen <bacetti.abdelmou...@gmail.com> Sendt: fredag 13. april 2018 16:20 Til: opm@opm-project.org Emne: Re: [Opm] (no subject) Dear Mr. Atgeirr, Regarding what you have said on Ubuntu binary, is it possible to the same on Redhat (which the system used on the HPC)? Abdelmoumen Regards/Cordialement Abdelmoumen Bacetti abdelmoumen.bace...@sonatrach.dz<mailto:abdelmoumen.bace...@sonatrach.dz> bacetti.abdelmou...@gmail.com<mailto:bacetti.abdelmou...@gmail.com> Linkedin<https://www.linkedin.com/in/abdelmoumen-bacetti-01a46b138/> & Researchgate<https://www.researchgate.net/profile/Abdelmoumen_Bacetti2> On Fri, Apr 13, 2018 at 8:24 AM, Atgeirr Rasmussen <atgeirr.rasmus...@sintef.no<mailto:atgeirr.rasmus...@sintef.no>> wrote: Dear Mr. Abdelmoumen, I recommend that you try running OPM Flow on HPC systems using the Singularity container system. You should ask your HPC maintainer if Singularity is supported. If not, Docker containers are also available, but will probably not be able to exploit the special hardware typically present in an HPC system. Also, if you can run a Ubuntu binary on the system, you can install the binary packages for Ubuntu 16.04 as explained on the OPM web site: https://opm-project.org/?page_id=36 All of the preceding options are compiled with MPI, meaning that the Flow executable can be run with mpirun in parallel. Finally, there is a new release underway, before the end of the month a new version is available. Atgeirr ________________________________ Frå: Opm <opm-boun...@opm-project.org<mailto:opm-boun...@opm-project.org>> på vegne av bacetti abdelmoumen <bacetti.abdelmou...@gmail.com<mailto:bacetti.abdelmou...@gmail.com>> Sendt: 12. april 2018 17:07 Til: opm@opm-project.org<mailto:opm@opm-project.org> Emne: [Opm] (no subject) Willing to run OPM on the university HPC, is there any parallel version of OPM's binary or does the HPC admin have to compile it from source for that. If it is required to compile the source to get a parallel version, what are the compiler options? _______________________________________________ Opm mailing list Opm@opm-project.org<mailto:Opm@opm-project.org> https://opm-project.org/cgi-bin/mailman/listinfo/opm ------------------------------------------------------------------- The information contained in this message may be CONFIDENTIAL and is intended for the addressee only. Any unauthorized use, dissemination of the information or copying of this message is prohibited. If you are not the addressee, please notify the sender immediately by return e-mail and delete this message. Thank you ------------------------------------------------------------------- The information contained in this message may be CONFIDENTIAL and is intended for the addressee only. Any unauthorized use, dissemination of the information or copying of this message is prohibited. If you are not the addressee, please notify the sender immediately by return e-mail and delete this message. Thank you
_______________________________________________ Opm mailing list Opm@opm-project.org https://opm-project.org/cgi-bin/mailman/listinfo/opm
