Hi, I am using OPNFV Danube 3.0. I deployed one Openstack Controller with ODL & Tacker and Openstack Compute through Fuel. I am trying to execute the usecase: sfc_two_chains_SSH_and_HTTP When I create two chains, Classifier flow is missing in the compute node. I executed below commands:
#> tacker vnfd-create --vnfd-file test-vnfd-1.yaml #> tacker vnfd-create --vnfd-file test-vnfd-2.yaml #> tacker vnf-create --name testVNF1 --vnfd-name test-vnfd-1 #> tacker vnf-create --name testVNF2 --vnfd-name test-vnfd-2 #> tacker sfc-create --name mychain1 --chain testVNF1 #> tacker sfc-create --name mychain2 --chain testVNF2 #> tacker sfc-classifier-create --name myclass1 --chain mychain1 --match source_port=0,dest_port=80,protocol=6 When I execute the above command, I am not able to see classifier flow in the compute node. The flow should be something similar to below: # ovs-ofctl dump-flows br-int -O Openflow13 | grep tcp cookie=0x1110010005970255, duration=121.077s, table=11, n_packets=0, n_bytes=0, tcp,reg0=0x1,tp_dst=80 actions=move:NXM_NX_TUN_ID[0..31]->NXM_NX_NSH_C2[],push_nsh,load:0x1->NXM_NX_NSH_MDTYPE[],load:0x3->NXM_NX_NSH_NP[],load:0xc0a8001a->NXM_NX_NSH_C1[],load:0x255->NXM_NX_NSP[0..23],load:0xff->NXM_NX_NSI[],load:0x7b7b7b05->NXM_NX_TUN_IPV4_DST[],load:0x255->NXM_NX_TUN_ID[0..31],resubmit(,0) The above flow is not adding. But, when I tried the same with single Chain, I am able to see the above flow. Is there any issue with two chains? Regards, Srikanth.
_______________________________________________ opnfv-tech-discuss mailing list opnfv-tech-discuss@lists.opnfv.org https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss