Hi, Thanks Roger and Karsten.. I think that its set up now, I'm just waiting for the server to come back to say that its visible. I can certainly connect to the ports remotely with telnet, so thats good..
Thanks! Andy On Tue, 2010-06-08 at 04:48 -0400, Roger Dingledine wrote: > On Tue, Jun 08, 2010 at 07:51:33AM +0100, Andy Dixon wrote: > > I'm trying to set up a pretty decent server on our 50 meg leased line > > and I am having difficulty in doing it. > > > > We have a bunch of IP addresses and we have to use port forwarding to > > rote it to an internal IP address. > > > > I have done that bit, (Both TCP and UDP), however the logs are showing: > > > > Jun 08 07:49:38.166 [warn] Your server has not managed to confirm that > > its DirPort is reachable. Please check your firewalls, ports, > > address, /etc/hosts file, etc. > > > > I have set in the configuration file the public IP address, and not the > > internal IP address. > > > > Any outbound traffic ends up going through a different public IP > > address. > > There are three torrc options you want to look at: > > "Address" is the IP address that your relay publishes to the outside > world. That will be the address that other clients use to reach you, > and it will also be the address that your Tor relay uses to check its > own reachability. > > "OutboundBindAddress" tells your Tor which IP address to bind for > connections that it launches. It's useful for your case where (I think) > you have more than one outgoing route and a different IP address for > each outgoing route. > > Optionally, "ORListenAddress" will tell your Tor to only bind to specific > IP addresses for incoming connections. You can do this if you *don't* > want to listen on some of your addresses; but its default of 0.0.0.0 > should work fine. > > Btw, you don't need to port-forward incoming UDP. > > Hope that helps, > --Roger > > *********************************************************************** > To unsubscribe, send an e-mail to [email protected] with > unsubscribe or-talk in the body. http://archives.seul.org/or/talk/ *********************************************************************** To unsubscribe, send an e-mail to [email protected] with unsubscribe or-talk in the body. http://archives.seul.org/or/talk/
