Hi, Doug, Thanks for help.
My linphone doesn't create a default ~/.linphonec file, but I copied your configuration. I have changed the following options: contact=sip:[EMAIL PROTECTED] reg_identity=sip:[EMAIL PROTECTED] username=717013 passwd="savant" I've replaced the values with my account number and password. But it still doesn't work, just appears a message "Registration on sip:fwd.pulver.com sucessful." every several minutes. Thanx, Roma, out 25.02.2006 21:04, Doug Smith (wrote): > > Ok, you need a fast connection either of these: The cable modem or > the dsl system as provided by your telephone company. Slow speed > systems such as 33.6 modems are not supported by freeworlddialup.com. > They have no plan to support these, according to their information on > the web site. I don't know why. > > Yes, 33.6 modems will work, and I think that the standard > configuration file that comes up when you start linphone for the first > time should work, but you have to contact the other machine directly > across the network. > > However, you can try out freeworlddialup.com with my linphonec > configuration file. I will include it here. > > [net] > con_type=3 > use_nat=0 > > [sip] > sip_port=5060 > guess_hostname=0 > contact=sip:[EMAIL PROTECTED] > use_info=0 > use_ipv6=0 > default_proxy=0 > > [rtp] > audio_rtp_port=7078 > video_rtp_port=9078 > audio_jitt_comp=128 > video_jitt_comp=128 > > [sound] > dev_id=0 > rec_lev=100 > play_lev=87 > source=m > local_ring=/usr/share/sounds/linphone/rings/oldphone.wav > remote_ring=/usr/share/sounds/linphone/ringback.wav > playback_dev_id=0 > capture_dev_id=0 > > [video] > enabled=0 > show_local=0 > > [audio_codec_0] > mime=PCMU > rate=8000 > enabled=1 > > [audio_codec_1] > mime=speex > rate=16000 > enabled=1 > > [audio_codec_2] > mime=GSM > rate=8000 > enabled=1 > > [audio_codec_3] > mime=PCMA > rate=8000 > enabled=1 > > [audio_codec_4] > mime=speex > rate=8000 > enabled=1 > > [audio_codec_5] > mime=1015 > rate=8000 > enabled=1 > > [proxy_0] > reg_proxy=sip:fwd.pulver.com > reg_identity=sip:[EMAIL PROTECTED] > reg_expires=900 > reg_sendregister=1 > publish=1 > > [auth_info_0] > username=717013 > passwd="savant" > realm="fwd..pulver.com" > > [auth_info_1] > username=717013 > passwd=savant > realm="fwd.pulver.com" > > > This is the configuration I use with this broadband connection. You > can try it and see if linphonec will tell you that you have > successfully registered on freeworlddialup.com. Please tell me if > this works. I don't know what their problem is when it comes to > supporting a wider range of connection speeds. I don't have the > equipment here or I would do it for anyone who needs this kind of > support. > > > > Hope this helps. > > -- > Doug Smith: C.S.F.C. > Computer Scientist For CHRIST! > > Oralux: http://oralux.org > _______________________________________________ > Oralux mailing list > [email protected] > http://lists.freearchive.org/mailman/listinfo/oralux _______________________________________________ Oralux mailing list [email protected] http://lists.freearchive.org/mailman/listinfo/oralux
