Hello Patrick,
On Sep 22, 2009, at 17:45 , Patrick Ohly wrote:
Hello Lukas!
Thanks a lot! Now we just need to figure out how to enable
"lenientMode"
for specific servers in SyncEvolution.
On Mon, 2009-09-21 at 18:02 +0100, Lukas Zeller wrote:
Both legacyMode and lenientMode now have a corresponding tag for use
in <remoterule>, so the modes can be configured on a per-client base
in servers.
You probably would have mentioned it, but... can remote rules also be
enabled in a client on a per-server basis?
Probably, but I never tested that. I thought you tried something in
this area a while ago?
It might also be too late as the client would need a devInf result
BEFORE it gets the Alert status, which probably is not always the case.
Anyway, enabling lenientMode can be done setting a flag in the /
profiles/xxxx key: in the value "profileFlags" set bit 2
(PROFILEFLAG_LENIENTMODE). This is exactly the same way as legacy mode
works (PROFILEFLAG_LEGACYMODE). I thought this would simple become a
parameter for those preconfigured servers which need it (ZYB for now).
Best Regards,
Lukas Zeller ([email protected])
-
Synthesis AG, SyncML Solutions & Sustainable Software Concepts
[email protected], http://www.synthesis.ch
_______________________________________________
os-libsynthesis mailing list
[email protected]
http://lists.synthesis.ch/mailman/listinfo/os-libsynthesis
