Hi Andris, On 24.05.2012, at 08:33, Andris Pavenis wrote:
>> I don't see any authentication in the incoming messages, not in the XML >> translation and also not when looking at hexdumps of the WBXML. The only >> thing I see is the<LocName> test, but that's not enough for an auth >> attempt, there must be some credentials. > It responds according with authentication to WireShark. Try using WireShark > on capture file and decode port 9321 as HTTP. Yes, I see that, but I can't find the matching wbxml incoming message dump in the *.wbxml you sent. All those 4 don't have the Cred element, IMHO. > It seems however that public ID "//SYNCML//DTD SyncML 1.2//ENmlq\0031.2" > instead of "//SYNCML//DTD SyncML 1.2//EN" also causes some problems. For > example WireShark shows WBXML tag numbers instead of interpretting them as > SyncML WBXML tags. That's wrong on SE's part, and is certainly the reason why Wireshark does not recognize it as SyncML, but apparently is not be a problem for the SyncML TK decoder. If it was a problem, it would not decode anything in that message. Best Regards, Lukas _______________________________________________ os-libsynthesis mailing list [email protected] http://lists.synthesis.ch/mailman/listinfo/os-libsynthesis
