Le dimanche 29 juillet 2007 17:53, vous avez écrit : > Hi All, > I solved the p5k-vm no reboot problem. > First I deduced it was not the sata ahci hardware by replacing with > external pci sata linux compatible card. > But that still caused kernel panic so i resored it back to the on board > sata 2 ahci and replaced the onboard video with a asus 128 MB pci > express card and it installs and reboots fine! > So it was the video driver in the installed kernel that was some how > causing kernel panic! > I belive it is caused by this line during install for this particular > soltion $46.00 > Detecting hardware using pci-automod ( this may take a long time ..) > The P5k -vm installs from fc7 dvd without any problems so it must be the > oscar install mentioned above module!
As we said before, OSCAR does not use any specific kernel module, OSCAR uses the kernel configuration of the headnode. I agree that in your case you have a weird behavior but i do not think OSCAR is "responsible" of the problem. But i glad you found a solution to your problem. > Thank you, > Cheers, > Allan Menezes > > Geoffroy VALLEE wrote: > >Hi Allan, > > > >It is still a problem with your i915 driver, last time i asked you to > > check the bios and so on but you did not reply. Therefore, i cannot help > > you more... maybe others can. > > > >Anyway, a couple of questions to try to understand you problem: > >- you said all the nodes are the same, right? > >- do you have this problem with all the compute nodes (it may be a > > hardware problem on a single compute node)? > >- do you try to take the "default" bios options and not the "optimal" one? > >- what is the PCI device 0xcd/0x134? > >- did you try to disable ACPI? > > > >Regards, > > > >On Saturday 28 July 2007 21:02, Allan Menezes wrote: > >>Hi All, > >> i am still having problems with the p5k-vm mobo. The fc7 kernel is the > >>latest now at 2.6.22.1-33.fc7. > >>I put an external Adaptec Sata2 pci expansion card on the pci bus and > >>installed the clent image but i still get get a kernel panic with the > >>same error meassages below. > >>Please help. I think it's the new chipset (g33 and ich9). Iif only some > >>body could ask Intel about this new mobo. IT is a good mobo for cluster > >>building costs $130.00 cdn and has DDR3 and FSB1333 support. > >>Quad core support too and Quad core Q6600 cpus have come down to $266.00 > >>US! Regards, > >>Allan > >> > >>Hi Bernard, Geoffrey, > >> I cannot take ascreen capture after the kernel panic message because > >>the system hangs. > >>Yes the head node has the identical hardware as two other client nodes > >>that kernel panic. > >>I tried copying the modprobe.conf from the head node to the client image > >>in ../oscarimage//etc. > >>but i still got a kernel panic. > >>Since I cannot get a screen capture I am copying this down from the > >> screen: Call Trace: > >>agp_add_bridge+0x1c4/0x2dc > >>pci_device_probe+0xcd/0x134 > >>driver_probe_device+0xff/0x17c > >>__driver_attach+0x90/0xcc > >>__driver_attach+0x0/0xcc > >>__driver_attach+0x0/0xcc > >>bus_for_each_dev+0x43/0x6e > >>bus_add_driver+0x7b/0x19d > >>__pci_register_driver+0x58/0x8a > >>kernel_init+0x206/0x370 > >>child_rip+0xa/0x12 > >>acpi_ds_init_one_object+0x0/0x7c > >>kernel_init+0x0/0x370 > >>child_rip+0x0/0x12 > >>Code: 89 10 48 89 c8 48 03 05 39 af 37 00 48 83 c1 04 8b 00 3b 73 > >>RIP [<ffffffff8117b60b>] intel_i915_configure+0xf3/0x115 > >> RSP <ffff8100bf977d60> > >>CR2: ffffc2000147fffc > >>Kernel panic - not syncing: Attempted to kill init! > >> > >>and then it hangs .. > >>the kernel of fc7 oscar installs in oscarimage is 2.6.22.27-fc7 > >>Thank you and your help would be appreciated! > >>'Regards, > >>Allan > >> > >>Bernard Li wrote: > >>>Hi Allan: > >>> > >>>Please take a screen capture of the screen when you get the "kernel > >>>panic" message -- we need additional information from the screen (like > >>>the messages which came before that message) to troubleshoot this > >>>issue further. > >>> > >>>Does your headnode have the same hardware as the client nodes you are > >>>having issues with? Copying modprobe.conf to the image only works if > >>>they are of the same hardware -- in your case you need to get a > >>>working modprobe.conf for the _clients_ and then copy it to the image, > >>>but of course this may not work with other hardware, so maybe you need > >>>to create a separate image or somehow make the modprobe.conf work for > >>>all your hardware. > >>> > >>>Regards, > >>> > >>>Bernard > >>> > >>>On 7/24/07, Geoffroy Vallée <[EMAIL PROTECTED]> wrote: > >>>>Hi Allan, > >>>> > >>>>If you have the message "kernel panic - not syncing: Attempted to kill > >>>>init." you most certainly have other usefull logs just before. And > >>>>without these logs it is almost impossible to help you. > >>>> > >>>>Therefore as i said in my previous email, we need at least the logs > >>>>before the kernel panic. Without these logs it is impossible to know > >>>>what causes the panic. > >>>> > >>>>Regards, > >>>> > >>>>Le lundi 23 juillet 2007 22:58, Allan Menezes a écrit: > >>>>>Geoffroy Vallée wrote: > >>>>>>Allan, > >>>>>> > >>>>>>Can you the full log before the kernel panic? Without these messages > >>>>>> is kind of difficult to know what is the problem. > >>>>>> > >>>>>>Thanks, > >>>>>> > >>>>>>Le lundi 23 juillet 2007 21:02, Allan Menezes a écrit : > >>>>>>>Can anybody help me with the p5k-vm mobo which is just out problem > >>>>>>> of instralling an image (client) and giving a kernel panic on > >>>>>>> reboot, PLease? > >>>>> > >>>>>Hi Geoffrey, > >>>>> Oscar installs and works with fc7 on a head node of p5k-vm but > >>>>> client p5k-vm install the client image perfectly > >>>>>but it is on reboot to set up the network with the installed > >>>>> oscarimage that i get : > >>>>>kernel panic - not syncing: Attempted to kill init. > >>>>>So the log file will be perfect. It will not show aproblem.There is > >>>>> none with installation. the oscarimage grabs the latest kernel for > >>>>> fc7 which is 2.6.22.27-fc7 > >>>>>and install it into oscarimage. > >>>>>I can install fc7 with a fc7 dvd on these mobos without any problems > >>>>>with the latest kernel. It's just on client install that i get the > >>>>> above error on reboot! > >>>>>the p5b-vm is an intel g33 ich9 chipset mobo. The p5b-vm which are > >>>>> intel 965 ich8 work fine on reboot! > >>>>>The intel website does not show support for linux for their g33 mobos > >>>>> on their website. > >>>>>I can howevever install fc7 with the stock kernel on the p5k-vm mobo > >>>>>perfectly as a head node with dvd (fc7) > >>>>>however. They just don't like to be oscar clients. > >>>>>Do not know what the problem is. > >>>>>BUt I can get the mobo to not reboot and go to the busy box screen and > >>>>>maybe trouble shoot the installed image before rebooting? > >>>>>Can you give me some help on that ,please? It's seems its the only > >>>>>likely way to get it working as a client right now. > >>>>>Thank you very much for your response, > >>>>>Best Wishes, > >>>>>Allan Menezes > >>>> > >>>>-- > >>>>Geoffroy > >>>> > >>>>----------------------------------------------------------------------- > >>>>-- This SF.net email is sponsored by: Splunk Inc. > >>>>Still grepping through log files to find problems? Stop. > >>>>Now Search log events and configuration files using AJAX and a browser. > >>>>Download your FREE copy of Splunk now >> http://get.splunk.com/ > >>>>_______________________________________________ > >>>>Oscar-devel mailing list > >>>>[email protected] > >>>>https://lists.sourceforge.net/lists/listinfo/oscar-devel > >>> > >>>------------------------------------------------------------------------ > >>>- This SF.net email is sponsored by: Splunk Inc. > >>>Still grepping through log files to find problems? Stop. > >>>Now Search log events and configuration files using AJAX and a browser. > >>>Download your FREE copy of Splunk now >> http://get.splunk.com/ > >>>_______________________________________________ > >>>Oscar-devel mailing list > >>>[email protected] > >>>https://lists.sourceforge.net/lists/listinfo/oscar-devel -- Geoffroy ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Oscar-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/oscar-devel
