Le dimanche 29 juillet 2007 17:21, vous avez écrit : > Hi Geoffrey, > 3 nodes a p5k-vm mobos including the head node. 2 are slave . The > rest 5 are p5b-vm which are fine , install reboot etc. > > Geoffroy VALLEE wrote: > >Hi Allan, > > > >It is still a problem with your i915 driver, last time i asked you to > > check the bios and so on but you did not reply. Therefore, i cannot help > > you more... maybe others can. > > This is not a i915 chipset it is a g33 and ich9 chipset so maybe it is > loading the wrong chipsetset driver on install?
The i915 driver is definitively loaded and seems to create the crash. It is weird that the driver is loaded if the chipset is not there. From the headnode, can you give me the result of the three following commands 'uname -a', 'lspci -nn' and 'lsmod'? > > >Anyway, a couple of questions to try to understand you problem: > >- you said all the nodes are the same, right? > > no as i explained above > > >- do you have this problem with all the compute nodes (it may be a > > hardware problem on a single compute node)? > > Two p5k-vm mobo compute nodes only Ok. > > >- do you try to take the "default" bios options and not the "optimal" one? > >- what is the PCI device 0xcd/0x134? > >- did you try to disable ACPI? > > I tried different options of the bios even installing a linux compatible > pci to sata 2 card on the pci bus and disabling the ide and ahci in bios > but still kernel panic! Ok, good to know. Did you try to directly install fc7 on a compute node? > Thank you, > Allan > > >Regards, > > > >On Saturday 28 July 2007 21:02, Allan Menezes wrote: > >>Hi All, > >> i am still having problems with the p5k-vm mobo. The fc7 kernel is the > >>latest now at 2.6.22.1-33.fc7. > >>I put an external Adaptec Sata2 pci expansion card on the pci bus and > >>installed the clent image but i still get get a kernel panic with the > >>same error meassages below. > >>Please help. I think it's the new chipset (g33 and ich9). Iif only some > >>body could ask Intel about this new mobo. IT is a good mobo for cluster > >>building costs $130.00 cdn and has DDR3 and FSB1333 support. > >>Quad core support too and Quad core Q6600 cpus have come down to $266.00 > >>US! Regards, > >>Allan > >> > >>Hi Bernard, Geoffrey, > >> I cannot take ascreen capture after the kernel panic message because > >>the system hangs. > >>Yes the head node has the identical hardware as two other client nodes > >>that kernel panic. > >>I tried copying the modprobe.conf from the head node to the client image > >>in ../oscarimage//etc. > >>but i still got a kernel panic. > >>Since I cannot get a screen capture I am copying this down from the > >> screen: Call Trace: > >>agp_add_bridge+0x1c4/0x2dc > >>pci_device_probe+0xcd/0x134 > >>driver_probe_device+0xff/0x17c > >>__driver_attach+0x90/0xcc > >>__driver_attach+0x0/0xcc > >>__driver_attach+0x0/0xcc > >>bus_for_each_dev+0x43/0x6e > >>bus_add_driver+0x7b/0x19d > >>__pci_register_driver+0x58/0x8a > >>kernel_init+0x206/0x370 > >>child_rip+0xa/0x12 > >>acpi_ds_init_one_object+0x0/0x7c > >>kernel_init+0x0/0x370 > >>child_rip+0x0/0x12 > >>Code: 89 10 48 89 c8 48 03 05 39 af 37 00 48 83 c1 04 8b 00 3b 73 > >>RIP [<ffffffff8117b60b>] intel_i915_configure+0xf3/0x115 > >> RSP <ffff8100bf977d60> > >>CR2: ffffc2000147fffc > >>Kernel panic - not syncing: Attempted to kill init! > >> > >>and then it hangs .. > >>the kernel of fc7 oscar installs in oscarimage is 2.6.22.27-fc7 > >>Thank you and your help would be appreciated! > >>'Regards, > >>Allan > >> > >>Bernard Li wrote: > >>>Hi Allan: > >>> > >>>Please take a screen capture of the screen when you get the "kernel > >>>panic" message -- we need additional information from the screen (like > >>>the messages which came before that message) to troubleshoot this > >>>issue further. > >>> > >>>Does your headnode have the same hardware as the client nodes you are > >>>having issues with? Copying modprobe.conf to the image only works if > >>>they are of the same hardware -- in your case you need to get a > >>>working modprobe.conf for the _clients_ and then copy it to the image, > >>>but of course this may not work with other hardware, so maybe you need > >>>to create a separate image or somehow make the modprobe.conf work for > >>>all your hardware. > >>> > >>>Regards, > >>> > >>>Bernard > >>> > >>>On 7/24/07, Geoffroy Vallée <[EMAIL PROTECTED]> wrote: > >>>>Hi Allan, > >>>> > >>>>If you have the message "kernel panic - not syncing: Attempted to kill > >>>>init." you most certainly have other usefull logs just before. And > >>>>without these logs it is almost impossible to help you. > >>>> > >>>>Therefore as i said in my previous email, we need at least the logs > >>>>before the kernel panic. Without these logs it is impossible to know > >>>>what causes the panic. > >>>> > >>>>Regards, > >>>> > >>>>Le lundi 23 juillet 2007 22:58, Allan Menezes a écrit: > >>>>>Geoffroy Vallée wrote: > >>>>>>Allan, > >>>>>> > >>>>>>Can you the full log before the kernel panic? Without these messages > >>>>>> is kind of difficult to know what is the problem. > >>>>>> > >>>>>>Thanks, > >>>>>> > >>>>>>Le lundi 23 juillet 2007 21:02, Allan Menezes a écrit : > >>>>>>>Can anybody help me with the p5k-vm mobo which is just out problem > >>>>>>> of instralling an image (client) and giving a kernel panic on > >>>>>>> reboot, PLease? > >>>>> > >>>>>Hi Geoffrey, > >>>>> Oscar installs and works with fc7 on a head node of p5k-vm but > >>>>> client p5k-vm install the client image perfectly > >>>>>but it is on reboot to set up the network with the installed > >>>>> oscarimage that i get : > >>>>>kernel panic - not syncing: Attempted to kill init. > >>>>>So the log file will be perfect. It will not show aproblem.There is > >>>>> none with installation. the oscarimage grabs the latest kernel for > >>>>> fc7 which is 2.6.22.27-fc7 > >>>>>and install it into oscarimage. > >>>>>I can install fc7 with a fc7 dvd on these mobos without any problems > >>>>>with the latest kernel. It's just on client install that i get the > >>>>> above error on reboot! > >>>>>the p5b-vm is an intel g33 ich9 chipset mobo. The p5b-vm which are > >>>>> intel 965 ich8 work fine on reboot! > >>>>>The intel website does not show support for linux for their g33 mobos > >>>>> on their website. > >>>>>I can howevever install fc7 with the stock kernel on the p5k-vm mobo > >>>>>perfectly as a head node with dvd (fc7) > >>>>>however. They just don't like to be oscar clients. > >>>>>Do not know what the problem is. > >>>>>BUt I can get the mobo to not reboot and go to the busy box screen and > >>>>>maybe trouble shoot the installed image before rebooting? > >>>>>Can you give me some help on that ,please? It's seems its the only > >>>>>likely way to get it working as a client right now. > >>>>>Thank you very much for your response, > >>>>>Best Wishes, > >>>>>Allan Menezes > >>>> > >>>>-- > >>>>Geoffroy > >>>> > >>>>----------------------------------------------------------------------- > >>>>-- This SF.net email is sponsored by: Splunk Inc. > >>>>Still grepping through log files to find problems? Stop. > >>>>Now Search log events and configuration files using AJAX and a browser. > >>>>Download your FREE copy of Splunk now >> http://get.splunk.com/ > >>>>_______________________________________________ > >>>>Oscar-devel mailing list > >>>>[email protected] > >>>>https://lists.sourceforge.net/lists/listinfo/oscar-devel > >>> > >>>------------------------------------------------------------------------ > >>>- This SF.net email is sponsored by: Splunk Inc. > >>>Still grepping through log files to find problems? Stop. > >>>Now Search log events and configuration files using AJAX and a browser. > >>>Download your FREE copy of Splunk now >> http://get.splunk.com/ > >>>_______________________________________________ > >>>Oscar-devel mailing list > >>>[email protected] > >>>https://lists.sourceforge.net/lists/listinfo/oscar-devel -- Geoffroy ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Oscar-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/oscar-devel
