Hello DongInn, Am Dienstag, den 15.01.2008, 08:07 -0500 schrieb DongInn Kim: > Hi Dominik, > > Well, the OSCAR OpenMPI requires to have "tm" support. Please recompile > OpenMPI on the current cluster which torque and torque-devel rpms installed. > (e.g., rpmbuild --rebuild --define "oscar 1" --define "_packager Dominik > Ships <[EMAIL PROTECTED]>" --define "_vendor OSCAR" --define > "configure_options --with-tm=/opt/pbs" --target x86_64 openmpi-1.2.4.src.rpm )
Ok, I'll recompile the openmpi to get tm support withg your description. At the moment first I'm searching for a good solution with insserv problems with RPMs on SLES. --> post_rpm_install: Running OSCAR package post_rpm_install scripts --> About to run /opt/oscar/packages/sis/scripts/post_rpm_nochroot for sis --> About to run /opt/oscar/packages/base/scripts/post_rpm_nochroot for base --> About to run /opt/oscar/packages/ganglia/scripts/post_rpm_nochroot for ganglia --> About to run /opt/oscar/packages/torque/scripts/post_client_rpm_install for torque insserv: Service network has to be enabled for service pbs_mom insserv: exiting now! /sbin/insserv failed, exit code 1 pbs_mom 0:off 1:off 2:off 3:off 4:off 5:off 6:off --> About to run /opt/oscar/packages/sync_files/scripts/post_rpm_nochroot for sync_files Created templates for image oscarimage in /opt/sync_files/templates/image/oscarimage Make sure these files do not contain any user accounts. Only system account IDs should be included! --> About to run /opt/oscar/packages/ntpconfig/scripts/post_rpm_install for ntpconfig insserv: Service syslog has to be enabled for service ntp insserv: Service network has to be enabled for service ntp insserv: exiting now! /sbin/insserv failed, exit code 1 Failed to enable ntp at /tmp/post_rpm_install line 65 Couldn't run /tmp//opt/oscar/packages/ntpconfig/scripts/post_rpm_install at ./post_rpm_install line 78 Couldn't run post_rpm_install for ntpconfig at ./post_rpm_install line 79 There were errors running post_rpm_install scripts. Please check your logs. at ./post_rpm_install line 91 at /usr/lib/systeminstaller/SystemInstaller/Tk/Image.pm line 485 Couldn't run postinstall at /usr/lib/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi/Tk.pm line 247 > And please double check to see if SLES 10.0 also provides OpenMPI. If so, > please make yume not pick it up but the oscar one (openmpi-1.2.4-1). OSCAR > one has the openmpi module embedded. (note, openmpi-switcher module is > different from this one and it is in a separated file). > FYI, what I mentioned at my previous email is the openmpi-switcher module > which is in a separate file:openmpi-switcher-modulefile-1.2.4-1.noarch.rpm. SLES10SP1 doesn't offer a openmpi package. > I hope you are not confused and you can figure this out all. No, thank you for your great help. -- Mit freundlichen Grüßen / Best regards Dominik Schips Tel.: +49 (0)21 61 - 46 43-112 Fax: +49 (0)21 61 - 46 43-100 credativ GmbH, HRB Mönchengladbach 12080 Hohenzollernstr. 133, 41061 Mönchengladbach Geschäftsführung: Dr. Michael Meskes, Jörg Folz ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Oscar-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/oscar-devel
