Im new the the concept of clusters and remote boot networking etc. I have 2 1.1G machines that are identical, listed below is the config of my network and the comnputer that will opperate as a primary machine for the cluster.
I have a firewall that assigns addresses via DHCP, this is a linux machine and serves the rest of my network. IP of this is 192.168.1.1 ES1 The machine I will use for the server in the cluster is Name: ES00 eth0 requests an IP from ES1 and can communicate with no problem eth1 has an IP address of 192.168.2.1 I setup the LUI script to use ESC00 as the server and assigned that the IP 192.168.2.1 HOSTS 127.0.0.0 localhost 192.168.2.1 ESC00 192.168.2.2 ESC01 HDD Partitions are as follows. / /boot /home swap NFS Exports the following /tftpboot /usr I run LUI via Webmin and the relevent files seem to be created with no errors. A message stating that i should insert the boot disk into ESC01. I boot ESC01 and the network card is found, IP gets assigned and I receive the error message... TFTP Error 1 (File Not Found), Unable to load the file. Searching for server (DHCP).... <sleep> I have managed to get past this once, I got the mesage Me: 192.168.2.2, Server: 192.168.2.1 Loading /tftpboot/vmlinuz-2.4.6-1.msc-up <sleep> <sleep> <sleep> And it repeated this for ages then muttered something about file not found.. I would appreciate any assistance. Regards Andrew. BTW: Im using MSC.Linux _______________________________________________ Oscar-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/oscar-users
