Feng Yang, Typically we have the boot order: Flpy, CD, HD, PXE.
If nothing is on the HD (or if you 'dd' the MBR) it will fall back to PXE, and after the install it will boot from the HD. There are other methods depending on your hardware's capabilities for remote admin but those are obviously more advanced questions and depend on the hardware. --tjn _________________________________________________________________________ Thomas Naughton [EMAIL PROTECTED] Research Associate (865) 576-4184 On Thu, 12 Dec 2002, Feng Yang wrote: > dear support: > I have one problems: > when I install the client node completely, I must change the bootlist > manually to downlevel the PXE boot. I wonder if there has the solution to > change the network boot package, with which client node can direct the PXE > boot to localdisk? > because if I have 64 nodes, it seems I can affort it, if I have 128 > or more, ...... > > Best regards; > Yang Feng > ISMS_ Open System Solution > Integrated Technology Services, IBM China > 23/F , IBM Tower Pacific Century Place 2A GongTi Bei Road Chao Yang > District Beijng 100027 > Tel: 86-10-65391188 Ext. 4138 > Fax: 86-10-65391692 > > > > > ------------------------------------------------------- > This sf.net email is sponsored by: > With Great Power, Comes Great Responsibility > Learn to use your power at OSDN's High Performance Computing Channel > http://hpc.devchannel.org/ > _______________________________________________ > Oscar-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/oscar-users > ------------------------------------------------------- This sf.net email is sponsored by: With Great Power, Comes Great Responsibility Learn to use your power at OSDN's High Performance Computing Channel http://hpc.devchannel.org/ _______________________________________________ Oscar-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/oscar-users
