I have seen some information about this in the old posting but I still can't figure out how to make it work. The situation is as follows:
1) I have a server with on-board Intel Gigabit adapter.
2) Installed RH9 / Oscar3.0 on the server node with Intel e1000 5.2.16 as module. Server node working fine. Installation went well until step 6 - Setup Networking. I have sucessfully get the MAC of my client node, etc. Client node boots up, get the initrd.img then cannot contact the DHCP server.
I have tried these:
1) copy the e1000.o module to initrd.img (with mounting loop back filesystem, compress back with cramfs, etc, etc) and put int insmod e1000.o into INSMOD_COMMANDS. Result is I got a whole list of unresolved symbols (I am guessing that it is the kernel version problem).
2) tried as http://sourceforge.net/mailarchive/forum.php?thread_id=3920507&forum_id=1364
and got a kernel panic that couldn't mount root filesystem.
Any pointer is very much appreciated. Thanks in advance.
Regards,
------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Oscar-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/oscar-users
