Linus,
You probably need to make a special kernel, however, before you can do
that you need to know what disk driver you have loaded. Would you
please try and find this, either by doing a "/sbin/lsmod" or looking at
the output of dmesg (also written in /var/log/messages) for the same
hardware running RH9. (I'm assuming that your server node is the same
hardware as the compute/client nodes).
Frank
On Mon, 2004-03-15 at 19:30, Linus Yong wrote:
> Hi All,
>
> I have seen some information about this in the old posting but I still can't
> figure out how to make it work. The situation is as follows:
>
> 1) I have a server with on-board Intel Gigabit adapter.
> 2) Installed RH9 / Oscar3.0 on the server node with Intel e1000 5.2.16 as
> module. Server node working fine. Installation went well until step 6 -
> Setup Networking. I have sucessfully get the MAC of my client node, etc.
> Client node boots up, get the initrd.img then cannot contact the DHCP
> server.
>
> I have tried these:
>
> 1) copy the e1000.o module to initrd.img (with mounting loop back
> filesystem, compress back with cramfs, etc, etc) and put int insmod e1000.o
> into INSMOD_COMMANDS. Result is I got a whole list of unresolved symbols (I
> am guessing that it is the kernel version problem).
>
> 2) tried as
> http://sourceforge.net/mailarchive/forum.php?thread_id=3920507&forum_id=1364
> and got a kernel panic that couldn't mount root filesystem.
>
> Any pointer is very much appreciated. Thanks in advance.
>
> Regards,
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _______________________________________________
> Oscar-users mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/oscar-users
--
ac3
Suite G16, Bay 7, Locomotive Workshop Phone: 02 9209 4600
Australian Technology Park Fax: 02 9209 4611
Eveleigh NSW 1430
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Oscar-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/oscar-users
