We have exactly the same problem as Chad Dupuis. RedHat9.0 does not recognize IntelGigabit ethernet cards (e1000) in our Supermicro 3.06 Dual Xeon servers unless e1000-5.2.52 driver is installed. We can install new e1000 driver on the master node and bring up the network cards but we can not do the same trick with the computational nodes since OSCAR does not generate an image that has the correct e1000 driver built-in. As in Chad's case, the nodes PXE boot, then they get the boot image from TFTP server, and then try either to get DHCP address or to assign static ip and fail because there is simply no eth0 or eth1 interface. Exactly the same happens if we generate a boot disk instead of PXE boot.
Can anybody suggest how to generate a RedHat9.0 boot image with the correct updated e1000 driver that can be used by OSCAR or how to force OSCAR to use the correct e1000 driver ? Pavel Petukhov University of Illinois at Chicago ------------------------------------------------------- This SF.Net email is sponsored by the new InstallShield X. >From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504 _______________________________________________ Oscar-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/oscar-users
