Hello Bruce,
Maybe there is an issue with permissions on ~/.ssh/ but please understand that
I typed the password wrong in the part you commented on:
> > [EMAIL PROTECTED]'s password:
> > Permission denied, please try again.
> > [EMAIL PROTECTED]'s password:
> > building file list ... done
Again I would like to shift the focus to the lines that contain "mkstemp" and
"rsync error" in the excerpt from step 7 below. Can you please comment
specifically on what might be causing that? Is it permissions on ~/.ssh/ or
could it be something else?
Vincent Randal
Longmont, CO
=============================================================================
== Running step 7 of the OSCAR wizard: Complete cluster setup
=============================================================================
--> Step 7: Running: ./post_install
Gathering processor count from oscarnode1.oscardomain.
Warning: Permanently added 'oscarnode1.oscardomain,192.168.20.101' (RSA) to the
Updating database for machine oscarnode1.oscardomain.
[EMAIL PROTECTED]'s password:
Permission denied, please try again.
[EMAIL PROTECTED]'s password:
building file list ... done
hosts
mkstemp /etc/.hosts.YMSXuG failed: Permission denied
wrote 78 bytes read 42 bytes 2.42 bytes/sec
total size is 216 speedup is 1.80
rsync error: partial transfer (code 23) at main.c(578)
--> About to run /opt/oscar/packages/switcher/scripts/post_install for switcher
Setting default for tag mpi ("lam-7.0")
Attribute successfully set; new attribute setting will be effective for
future shells
[EMAIL PROTECTED]'s password:
building file list ... done
switcher.ini
mkstemp /opt/env-switcher/etc/.switcher.ini.EFRVWc failed: Permission denied
wrote 238 bytes read 42 bytes 9.49 bytes/sec
total size is 189 speedup is 0.68
rsync error: partial transfer (code 23) at main.c(578)
--> About to run /opt/oscar/packages/pfilter/scripts/post_install for pfilter
(re)starting the pfilter firewall service on this server
/etc/init.d/pfilter restart
Restarting pfilter:
[ OK ]
pushing out the clients pfilter firewall configuration file
. /etc/profile.d/c3.sh && cpush /etc/pfilter.conf.clients /etc/pfilter.conf
[EMAIL PROTECTED]'s password:
building file list ... done
pfilter.conf.clients
mkstemp /etc/.pfilter.conf.d9eAJR failed: Permission denied
wrote 523 bytes read 90 bytes 22.29 bytes/sec
total size is 852 speedup is 1.39
rsync error: partial transfer (code 23) at main.c(578)
(re)starting the pfilter firewall service on the clients
. /etc/profile.d/c3.sh && cexec /etc/init.d/pfilter restart
[EMAIL PROTECTED]'s password:
--- Bruce Becker <[EMAIL PROTECTED]> wrote:
> Hi Vincent and OSCAR friends
> > --> Step 7: Running: ./post_install
> > Gathering processor count from oscarnode1.oscardomain.
> > Warning: Permanently added 'oscarnode1.oscardomain,192.168.20.101' (RSA) to
> the
> > Updating database for machine oscarnode1.oscardomain.
> > [EMAIL PROTECTED]'s password:
> > Permission denied, please try again.
> > [EMAIL PROTECTED]'s password:
> > building file list ... done
> Whenever we've had this problem, it's always been due to incorrect
> permissions on ~/.ssh/
>
> It's a dumb question - but are you sure that it's u+rx and that the
> authorized_keys and id_dsa.pub files are readable ?
>
> As for the user account password prompt - did you do a start_over ?
>
> Hope that helps.
> bruce
>
> --
> Bruce Becker
> UCT-CERN Research Center - University of Cape Town
> Private Bag RONDEBOSCH 7700
> tel :(w) +27 21 650 3356 | (m) +27 82 537 9425 | (f) +27 21 650 3342
> IM : AIM/Jabber - brucellino | Yahoo - uctbruce
> WEB :http://hep.phy.uct.ac.za/~becker
> "Viel hilft viel"
>
>
-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
_______________________________________________
Oscar-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/oscar-users
