I suspected that ;-)

Should we file a bug and fix the trunk?

I would assume we also want to do this for WS as well...  (knowing you,
you probably did that already... :-) )

Thanks,

Bernard 

> -----Original Message-----
> From: Lombard, David N [mailto:[EMAIL PROTECTED] 
> Sent: Friday, January 28, 2005 10:53
> To: Bernard Li; David R. James III
> Cc: [email protected]
> Subject: RE: [Oscar-users] Installing OSCAR 4.0 on RHEL ES 3
> 
> Bernard,
> 
> SF is REALLY, REALLY slow today.  I already sent David a 
> patch to fix this.
> 
> --
> David N. Lombard
>  
> My comments represent my opinions, not those of Intel Corporation.
> >-----Original Message-----
> >From: Bernard Li [mailto:[EMAIL PROTECTED]
> >Sent: Friday, January 28, 2005 10:29 AM
> >To: David R. James III; Lombard, David N
> >Cc: [email protected]
> >Subject: RE: [Oscar-users] Installing OSCAR 4.0 on RHEL ES 3
> >
> >Hi David:
> >
> >Jeff has already addressed the issue you are seeing - 
> basically OSCAR 
> >doesn't understand that RHEL3ES = RHEL3AS (at least that's the case
> with
> >switcher).
> >
> >Try the following, to see if it works:
> >
> >- Modify the file /opt/oscar/packages/switcher/scripts/setup
> >- Replace the line:
> >
> >  } elsif ($ver eq "3as") {
> >
> >  with
> >
> >  } elsif ($ver eq "3as") || $ver eq "3es") {
> >
> >- try again and see if that works
> >- if it doesn't, then modify the same file and try to print out the
> $ver
> >variable to figure out what it is and put it in the above statement.
> >
> >I would assume that you may encounter more of this with 
> other scripts - 
> >however, we can help you with that.
> >
> >Cheers,
> >
> >Bernard
> >
> >> -----Original Message-----
> >> From: [EMAIL PROTECTED]
> >> [mailto:[EMAIL PROTECTED] On Behalf 
> Of David 
> >> R. James III
> >> Sent: Thursday, January 27, 2005 7:45
> >> To: Lombard, David N
> >> Cc: [email protected]
> >> Subject: RE: [Oscar-users] Installing OSCAR 4.0 on RHEL ES 3
> >>
> >> David,
> >>    I decided to start over from scratch.  I re downloaded 
> the oscar4.0 
> >> tar ball and unziped it in root's home directory.  I then 
> moved into 
> >> the oscar-4.0 and configured it with ./configure.  Once this was 
> >> done, I installed it with make install.  I then moved to 
> /opt/oscar 
> >> and ran ./install_cluster eth0.  This runs through fine 
> until it gets 
> >> to the setup for switcher.  This is the error I am getting:
> >>
> >> --> About to run /opt/oscar/packages/switcher/scripts/setup
> >> for switcher
> >> /opt/oscar/packages/switcher/distro/rh72 does not exist at 
> >> /opt/oscar/packages/switcher/scripts/setup line 58 Using 
> modules RPMs 
> >> from: /opt/oscar/packages/switcher/distro/rh72
> >> Script /opt/oscar/packages/switcher/scripts/setup exitted 
> badly with 
> >> exit code '255' at ./wizard_prep line 187 Failed running 
> setup script 
> >> for switcher at ./wizard_prep line 187 Oscar Wizard preparation 
> >> script failed to complete at ./install_cluster line 215.
> >>
> >> This is the same error I received last time.  I have also attached 
> >> the install log so you can look at that as well.
> >> Any tips would be great.
> >>
> >> Thanks,
> >> David
> >>
> >> On Thu, 2005-01-27 at 00:51, Lombard, David N wrote:
> >> > David,
> >> >
> >> > Something's *really* wrong there.
> >> >
> >> > This is the process to install
> >> >  d/l oscar-4.0.tar.gz
> >> >  cd /opt
> >> >  tar xfz oscar-4.0.tar.gz
> >> >  cd oscar-4.0
> >> >  ./configure
> >> >  make install
> >> >  cd /opt/oscar
> >> >
> >> > Then, to start the OSCAR wizard,
> >> >
> >> >  ./install_cluster ethX
> >> >
> >> > where "ethX" is the cluster-private device, e.g., eth1
> >> >
> >> > Is that what you did?  If so, could you verify the 
> md5sums on the 
> >> > tarball?
> >> --
> >> David James
> >> Morris Digital Works
> >> System Administrator
> >> 706-828-4325
> >>
> 


-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Oscar-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/oscar-users

Reply via email to