> Also check "dmesg" and /var/log/messages - some times you can find info > about disk errors there. yeah, i probably should've done that first... anyway, it has lots of hints (no surprise there !)
relevant output from dmesg : Fusion MPT SCSI Host driver 3.01.16 scsi0 : ioc0: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=222, IRQ=201 Vendor: SEAGATE Model: ST373307LC Rev: 0007 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 sda7 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. EXT3 FS on sda6, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [EMAIL PROTECTED] cdrom: open failed. cdrom: open failed. cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2096440k swap on /dev/sda5. Priority:-1 extents:1 ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (4093 buckets, 32744 max) - 456 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff803e8aa0(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 SCSI error : <0 0 0 0> return code = 0x8000002 Deferred sda: sense key Hardware Error Additional sense: Defect list error end_request: I/O error, dev sda, sector 4251279 Buffer I/O error on device sda6, logical block 1257 lost page write due to I/O error on sda6 Aborting journal on device sda6. journal commit I/O error ext3_abort called. <---- clearly there is a problem here. EXT3-fs error (device sda6): ext3_journal_start_sb: Detected aborted journal Remounting filesystem read-only EXT3-fs error (device sda6) in start_transaction: Journal has aborted EXT3-fs error (device sda6) in start_transaction: Journal has aborted EXT3-fs error (device sda6) in start_transaction: Journal has aborted eth0: no IPv6 routers present EXT3-fs error (device sda6) in start_transaction: Journal has aborted EXT3-fs error (device sda6) in start_transaction: Journal has aborted [EMAIL PROTECTED] home]# Gareth, can you forward this to the Sun guys and ask them to come in to sort it out ? Thanks -- Bruce Becker DAPNIA/SPhN/CEA Saclay Fr-91191 Gif sur Yvette Cedex tel :(w) +33 1 69087482 | (m) + 33 62 739 5720 | (f) +33 1 69087584 IM : AIM/Jabber - brucellino | Yahoo - uctbruce WEB :http://hep.phy.uct.ac.za/~becker "Viel hilft viel" ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_idv37&alloc_id865&op=click _______________________________________________ Oscar-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/oscar-users
